ACT Science : ACT Science
Study concepts, example questions & explanations for ACT Science
All ACT Science Resources
Example Questions
Example Question #111 : Chemistry
The Ideal Gas Law is as follows:
A class of students began studying the Ideal Gas Law and how the Pressure and the Volume relate to one another. They took 20 moles of a sample gas and kept the room at a temperature of 300 Kelvin. They then used different sized containers of the gas to limit and expand the volume. At each different volume, they measure the pressure of the gas on its container. The table they made from their results is seen in table 1.
|
Temperature in Kelvin |
Pressure Measured in Pascals |
|
|
|
|
200 Kelvin |
16, 628 Pascals |
|
400 Kelvin |
33, 256 Pascals |
|
600 Kelvin |
49, 884 Pascals |
|
800 Kelvin |
66, 512 Pascals |
TABLE 1
FIGURE 1
The graph the students made based on the data is seen in Figure 1.
Pressure is created by the movement of the gas molecules pushing against a container. 0 Kelvin is known as absolute 0, the temperature at which all molecule movement theoretically stops.
If the equation for converting Kelvin to degrees Fahrenheit is:
at what temperature Fahrenheit is the pressure
When the given number of Pascals is put into the Ideal Gas Law and solved for 
Example Question #113 : Chemistry
The Ideal Gas Law is as follows:
A class of students began studying the Ideal Gas Law and how the Pressure and the Volume relate to one another. They took 20 moles of a sample gas and kept the room at a temperature of 300 Kelvin. They then used different sized containers of the gas to limit and expand the volume. At each different volume, they measure the pressure of the gas on its container. The table they made from their results is seen in table 1.
|
Temperature in Kelvin |
Pressure Measured in Pascals |
|
|
|
|
200 Kelvin |
16, 628 Pascals |
|
400 Kelvin |
33, 256 Pascals |
|
600 Kelvin |
49, 884 Pascals |
|
800 Kelvin |
66, 512 Pascals |
TABLE 1
FIGURE 1
The graph the students made based on the data is seen in Figure 1.
Pressure is created by the movement of the gas molecules pushing against a container. 0 Kelvin is known as absolute 0, the temperature at which all molecule movement theoretically stops.
If the equation that converts temperature Kelvin to temperature in degrees Fahrenheit is
what is the pressure of the sample gas at the freezing point of water, which is 32 degrees Fahrenheit?
To find the temperature Kelvin to which 32 degrees Fahrenheit correlates, the equation would look like this and one must solve for 
Example Question #120 : Chemistry
Current high levels of fossil fuel use, including coal-burning power plants and gasoline-powered automobiles, have helped contribute to the high concentrations of sulfur trioxide, SO3, found in the atmosphere. When sulfur trioxide and water interact, they can undergo the following chemical reaction to produce sulfuric acid, which is the main contributor to acid rain worldwide:
Acid rain showers are particularly common near coal-burning power plants and large cities. These showers are responsible for significant economic damage to sidewalks, roads, and buildings. Scientists interested in studying the effects of acid rain often use basic substances like calcium carbonate, the main component of limestone buildings, and expose them to varying volumes of acid rain to determine what volume of acid rain is necessary to begin to erode a building. A sample graph of one scientist’s experiment is replicated below:
Measuring acid and base levels is commonly done with a scale called pH, which uses the concentration of hydrogen ions to determine the acidity. Hydrogen ions are in a balance with hydroxide ions to give a scale with a range from 0 to 14. Values equal to or between 0 and 6.9 represent the acidic range where hydrogen ions predominate and values equal to or ranging from 7.1 and 14 represent the basic range where hydroxide ions predominate. Thus, the more hydrogen ions present, the more acidic the solution.
Scientists can tell when a titration (pH) experiment passes a certain pH using compounds called indicators. Indicators are usually colorless at pH levels below that of their specified color change. A table of indicators used by the above scientists and the pH at which they change colors is presented below.
Solutions A, B, and C each contain a different number of hydroxide ions. Solution A has an intermediate number of hydroxide ion, while solution B has the most, and solution C the fewest. Place the solutions in order of increasing number of hydrogen ions.
C < A < B
B < A < C
C < B < A
A < B < C
B < A < C
This question asks us to determine the relative order of three solutions with respect to their hydrogen ion number. The passage, particurarly the paragraph provided below the graph, tells us that when the hydrogen ion number is high, the hydroxide number is low. Thus a high number of hydroxide ions would give a low number of hydrogen ions. We can use this information to place the three solutions in order.
Example Question #801 : Act Science
Current high levels of fossil fuel use, including coal-burning power plants and gasoline-powered automobiles, have helped contribute to the high concentrations of sulfur trioxide, SO3, found in the atmosphere. When sulfur trioxide and water interact, they can undergo the following chemical reaction to produce sulfuric acid, which is the main contributor to acid rain worldwide:
Acid rain showers are particularly common near coal-burning power plants and large cities. These showers are responsible for significant economic damage to sidewalks, roads, and buildings. Scientists interested in studying the effects of acid rain often use basic substances like calcium carbonate, the main component of limestone buildings, and expose them to varying volumes of acid rain to determine what volume of acid rain is necessary to begin to erode a building. A sample graph of one scientist’s experiment is replicated below:
Measuring acid and base levels is commonly done with a scale called pH, which uses the concentration of hydrogen ions to determine the acidity. Hydrogen ions are in a balance with hydroxide ions to give a scale with a range from 0 to 14. Values equal to or between 0 and 6.9 represent the acidic range where hydrogen ions predominate and values equal to or ranging from 7.1 and 14 represent the basic range where hydroxide ions predominate. Thus, the more hydrogen ions present, the more acidic the solution.
Scientists can tell when a titration (pH) experiment passes a certain pH using compounds called indicators. Indicators are usually colorless at pH levels below that of their specified color change. A table of indicators used by the above scientists and the pH at which they change colors is presented below.
Solutions A, B, and C each contain a different number of hydroxide ions. Solution A has a pH of 9.2, solution B has a pH of 10.3, and solution C has a pH of 7.3. Place the solutions in order of increasing number of hydroxide ions.
C < B < A
B < A < C
A < B < C
C < A < B
C < A < B
This question provides us with the pH of a few solutions and asks us to determine the relative number of hydroxide ions present. Thus, we need to convert the pH into a general idea of the number of hydrogen ions and then understand the relationship between hydrogen and hydroxide. From the passage, we know that a low pH means an abundance of hydrogen ions. Additionally, we know that when the hydrogen ion number is high, the hydroxide ion number is low (the paragraph below the provided graph). Thus, we can use these two pieces of information to correctly order the solutions.
Example Question #122 : Chemistry
Current high levels of fossil fuel use, including coal-burning power plants and gasoline-powered automobiles, have helped contribute to the high concentrations of sulfur trioxide, SO3, found in the atmosphere. When sulfur trioxide and water interact, they can undergo the following chemical reaction to produce sulfuric acid, which is the main contributor to acid rain worldwide:
Acid rain showers are particularly common near coal-burning power plants and large cities. These showers are responsible for significant economic damage to sidewalks, roads, and buildings. Scientists interested in studying the effects of acid rain often use basic substances like calcium carbonate, the main component of limestone buildings, and expose them to varying volumes of acid rain to determine what volume of acid rain is necessary to begin to erode a building. A sample graph of one scientist’s experiment is replicated below:
Measuring acid and base levels is commonly done with a scale called pH, which uses the concentration of hydrogen ions to determine the acidity. Hydrogen ions are in a balance with hydroxide ions to give a scale with a range from 0 to 14. Values equal to or between 0 and 6.9 represent the acidic range where hydrogen ions predominate and values equal to or ranging from 7.1 and 14 represent the basic range where hydroxide ions predominate. Thus, the more hydrogen ions present, the more acidic the solution.
Scientists can tell when a titration (pH) experiment passes a certain pH using compounds called indicators. Indicators are usually colorless at pH levels below that of their specified color change. A table of indicators used by the above scientists and the pH at which they change colors is presented below.
A scientist wants to titrate a solution of sodium hydroxide at a pH of 14 with an acidic solution of phosporic acid at a pH of 10. She is attempting to create a solution that can mimic a basic environment. Which indicator would she likely use?
Propyl Cyonate
Cannot Be Determined
Isobutyl Terpine
Methyl Red
Methyl Red
This questions asks us to use the provided table to determine which indicator would be useful for use in the proposed experiment. In order to determine which indicator our scientist should use, we need to know the meaning of basic. The information contained in the passage, namely the paragraph below the curved graph, allows us to determine that a basic solution is above a pH of 7. Thus, our scientist would want to titrate to a pH around 9.2 using methyl red.
Example Question #21 : How To Find Synthesis Of Data In Chemistry
Current high levels of fossil fuel use, including coal-burning power plants and gasoline-powered automobiles, have helped contribute to the high concentrations of sulfur trioxide, SO3, found in the atmosphere. When sulfur trioxide and water interact, they can undergo the following chemical reaction to produce sulfuric acid, which is the main contributor to acid rain worldwide:
Acid rain showers are particularly common near coal-burning power plants and large cities. These showers are responsible for significant economic damage to sidewalks, roads, and buildings. Scientists interested in studying the effects of acid rain often use basic substances like calcium carbonate, the main component of limestone buildings, and expose them to varying volumes of acid rain to determine what volume of acid rain is necessary to begin to erode a building. A sample graph of one scientist’s experiment is replicated below:
Measuring acid and base levels is commonly done with a scale called pH, which uses the concentration of hydrogen ions to determine the acidity. Hydrogen ions are in a balance with hydroxide ions to give a scale with a range from 0 to 14. Values equal to or between 0 and 6.9 represent the acidic range where hydrogen ions predominate and values equal to or ranging from 7.1 and 14 represent the basic range where hydroxide ions predominate. Thus, the more hydrogen ions present, the more acidic the solution.
Scientists can tell when a titration (pH) experiment passes a certain pH using compounds called indicators. Indicators are usually colorless at pH levels below that of their specified color change. A table of indicators used by the above scientists and the pH at which they change colors is presented below.
If a scientist wanted to determine roughly when 22 mL of phosphoric acid had been added to a solution of sodium hydroxide, he would likely choose which indicator?
Isobutyl Terpine
Propyl Cyonate
Cannot Be Determined
Methyl Red
Isobutyl Terpine
According to the graph provided, adding 22 mL of an acid to a sodium hydroxide solution gives a pH around 7. Thus, our scientist would want to use an indicator that works around that pH, namely isobutyl terpine.
Example Question #22 : How To Find Synthesis Of Data In Chemistry
Current high levels of fossil fuel use, including coal-burning power plants and gasoline-powered automobiles, have helped contribute to the high concentrations of sulfur trioxide, SO3, found in the atmosphere. When sulfur trioxide and water interact, they can undergo the following chemical reaction to produce sulfuric acid, which is the main contributor to acid rain worldwide:
Acid rain showers are particularly common near coal-burning power plants and large cities. These showers are responsible for significant economic damage to sidewalks, roads, and buildings. Scientists interested in studying the effects of acid rain often use basic substances like calcium carbonate, the main component of limestone buildings, and expose them to varying volumes of acid rain to determine what volume of acid rain is necessary to begin to erode a building. A sample graph of one scientist’s experiment is replicated below:
Measuring acid and base levels is commonly done with a scale called pH, which uses the concentration of hydrogen ions to determine the acidity. Hydrogen ions are in a balance with hydroxide ions to give a scale with a range from 0 to 14. Values equal to or between 0 and 6.9 represent the acidic range where hydrogen ions predominate and values equal to or ranging from 7.1 and 14 represent the basic range where hydroxide ions predominate. Thus, the more hydrogen ions present, the more acidic the solution.
Scientists can tell when a titration (pH) experiment passes a certain pH using compounds called indicators. Indicators are usually colorless at pH levels below that of their specified color change. A table of indicators used by the above scientists and the pH at which they change colors is presented below.
If a scientist wanted to determine roughly when 26 mL of phosphoric acid had been added to a solution of sodium hydroxide, he would likely choose which indicator?
Methyl Red
Cannot Be Determined
Isobutyl Terpine
Propyl Cyonate
Propyl Cyonate
The question asks us to predict the indicator chosed by our scientist in the experiment. Using the graph provided, we can see that the pH is somewhere around 4 when the required volume of acid is added. Thus, we would want to choose an indicator that works around this pH. Using the options provided in the chart, we would likely choose propyl cyonate.
Example Question #807 : Act Science
A brilliant but underpaid high school chemistry teacher, together with his former student, manufactures a chemical compound, which they sell for a large mark-up. Their set of reactions are given below:
(1) A + B + C + acid --> D
(2) D --> intermediate
(3) Intermediate --> E
(4) E + acid --> X
His student notes the following observations:
Observation 1) If a greater amount of B and C are used in the reaction, this yields no increased amount of product D.
Observation 2) At any given point, D, the intermediate, and E may co-exist in equal proportions. However, at higher temperatures, higher proportions of product E are noted.
Observation 3) The addition of a strong base can reverse reaction 4.
Which of the following is true of the effects of temperature on reactions 2 and 3?
No relationship between heat, reaction 2, and reaction 3 can be concluded.
Regardless of the temperature, the intermediate is the most stable product.
Since at higher temperatures more of product E exists, reactions 2 and 3 can be considered exothermic (heat-producing).
Since at higher temperatures more of product E exists, reactions 2 and 3 can be considered endothermic (heat-needing).
Since at higher temperatures more of product E exists, reactions 2 and 3 can be considered endothermic (heat-needing).
Observation 2 illustrates that at higher temperatures more of product E will exist. This suggests that heat may help drive the reaction forward, indicating that the reaction of D to intermediate to E is endothermic (needing heat). Not enough information is supplied to determine which product is the most stable; however, the fact that more of E exists at higher temperatures may also indicate that it is a more stable compound. Generally, a compound will take the most stable form at higher temperatures.
Example Question #808 : Act Science
A brilliant but underpaid high school chemistry teacher, together with his former student, manufactures a chemical compound, which they sell for a large mark-up. Their set of reactions are given below:
(1) A + B + C + acid --> D
(2) D --> intermediate
(3) Intermediate --> E
(4) E + acid --> X
His student notes the following observations:
Observation 1) If a greater amount of B and C are used in the reaction, this yields no increased amount of product D.
Observation 2) At any given point, D, the intermediate, and E may co-exist in equal proportions. However, at higher temperatures, higher proportions of product E are noted.
Observation 3) The addition of a strong base can reverse reaction 4.
Adding a strong base will have which of the following effects?
(I) Convert X into E.
(II) Limit the amount of D formed in reaction 1.
(III) Convert E into D.
(IV) No effects.
I and III
IV
I and II
III
II and III
I and II
Observation III indicates that adding a base can convert X back into E, thus reversing the reaction. If adding a base nullifies the actions of an acid in reaction 4, it can also be inferred that it can have the same effect in reaction I. Therefore, options I and II are correct. Option IV can automatically be ruled out because there is an effect of adding a strong base. There is no information suggesting that adding a base will convert E back into D, as option III suggests.
Example Question #809 : Act Science
A brilliant but underpaid high school chemistry teacher, together with his former student, manufactures a chemical compound, which they sell for a large mark-up. Their set of reactions are given below:
(1) A + B + C + acid --> D
(2) D --> intermediate
(3) Intermediate --> E
(4) E + acid --> X
His student notes the following observations:
Observation 1) If a greater amount of B and C are used in the reaction, this yields no increased amount of product D.
Observation 2) At any given point, D, the intermediate, and E may co-exist in equal proportions. However, at higher temperatures, higher proportions of product E are noted.
Observation 3) The addition of a strong base can reverse reaction 4.
Reagents B and C are relatively inexpensive compared to A. What can be expected if twice the number of moles of B and C are used in reaction 1 with the number of moles of A held constant?
Four times the amount of D produced
No change in in the amount of D produced
Half the amount of D produced
Twice the amount of D produced
Eight times the amount of D produced
No change in in the amount of D produced
Observation 1 states that adding additional B or C has no effect in increased yield of D. From this statment, we can infer that reagent A is the "limiting reagent." In other words, the amount of D formed is entirely dependent on the amount of A available; therefore, doubling the amount of number of moles of B and C will not increase or decrease the amount of D formed.
All ACT Science Resources
