A particle accelerator functions by exerting a magnetic field on charged particles which are shot into the accelerator. The magnetic field causes the charged particles to move around in a circle of radius  that can be predicted by the following equation, where  is the mass of the particle in kilograms,  is the initial speed at which the particle was shot in meters per second,  is the charge of the particle in Coulombs, and  is the strength of the magnetic field in Tesla. 

A proton weighs approximately  amu (atomic mass units) and has a charge of  C. An electron has the same magnitude of charge, but it has about  of the proton's mass. What would happen to radius  if we were to suddenly switch the particle in the accelerator from a proton to an electron, keeping all of the other conditions the same?

Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.  

Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.

Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.

If the temperature of iron were raised slightly in Study 1, what would be the most likely result?

Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.  

Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.

Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.

Which study provides stronger evidence against the students' prediction and why?

Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.  

Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.

Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.

According to the information in the passage, what is necessary for sound to travel through a medium?

Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.  

Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.

Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.

In Study 1, if the students were to double the length of the samples of media, what would happen to the velocity of sound through those media?

A physicist wishes to study the trajectory of a ball launched horizontally. She varies parameters such as the launching velocity, starting height, and mass of the ball. For each trajectory, she records the time of flight (in seconds) and horizontal displacement (in meters). She assumes air resistance is negligible.

Figure 1

Using all of the data she collects, she constructs the following table:

Table 1

Based on the data presented in the table, what appears to be the relationship between the mass of the ball and the time of flight?

A physicist wishes to study the trajectory of a ball launched horizontally. She varies parameters such as the launching velocity, starting height, and mass of the ball. For each trajectory, she records the time of flight (in seconds) and horizontal displacement (in meters). She assumes air resistance is negligible.

Figure 1

Using all of the data she collects, she constructs the following table:

Table 1

In which trial(s) did the time of flight change between data points?

The period of a simple pendulum  is defined as the amount of time that it takes for a pendulum to swing from one end to the other and back. In studying the period of a simple pendulum, two students express their opinions.

Student 1: The period of a pendulum depends on two factors: the mass of the pendulum's bob (the object swinging at the end of the pendulum) and the length of the pendulum. The height at which the pendulum is originally dropped does not affect the period .

Student 2: The period of a pendulum  only depends on the length of the pendulum. Varying the mass and the height at which the pendulum is originally dropped does not affect how long the pendulum takes to swing across.

The two students ran a series of trials to measure the period of a simple pendulum using varying weights and lengths. The students did not measure height as a factor. The results of the trials can be seen in the table below: 

According to the data presented, what is the apparent relationship between mass  and period ?

The period of a simple pendulum  is defined as the amount of time that it takes for a pendulum to swing from one end to the other and back. In studying the period of a simple pendulum, two students express their opinions.

Student 1: The period of a pendulum depends on two factors: the mass of the pendulum's bob (the object swinging at the end of the pendulum) and the length of the pendulum. The height at which the pendulum is originally dropped does not affect the period .

Student 2: The period of a pendulum  only depends on the length of the pendulum. Varying the mass and the height at which the pendulum is originally dropped does not affect how long the pendulum takes to swing across.

The two students ran a series of trials to measure the period of a simple pendulum using varying weights and lengths. The students did not measure height as a factor. The results of the trials can be seen in the table below: 

According to the data, what is the apparent relationship between length  and period ?

A particle separator functions by using a magnetic field and an electric field pointing perpendicularly. When a charged particle is launched into the particle separator, a constant electric force is exerted on the particle proportional to the particle's charge. Additionally, the magnetic field exerts a force on the particle that is in the opposite direction of the electric force and that is proportional to the particle's charge and velocity. A particle will make it through the particle separator only if the opposing magnetic forces and electric forces are equal in magnitude as they will not cause a net change in the particle's direction.

What can we infer would happen if a proton (a particle with a positive charge) were shot into the particle accelerator with an extremely low speed?