This question deals with torques: 

It's important to note that torques are not (+) or (-), they are a direction, usually denoted as clockwise (CW) or counter clockwise (CCW). If you drew a FBD for each Deanna and Rishi, and included the pivot point, we'd see that each is in an opposite direction. That means that these torques oppose each other. If we want the seesaw to remain still, we must have the same torque on either side, this will result in a ZERO net torque. With that said, let's set this up!

The  on either side can cancel eachother out. Now let's solve for the distance Rishi is from the fulcrum ()

Remember that the equation for torque is:

where  is the force applied,  is the distance from the force's contact point to the object's (wrench's) COM and  is the angle between  and 

We are provided with a whole bunch of numbers in the equation, however the explanation is much simpler than that. Looking at the direction of the force in reference to the COM,  is zero.

Knowing our trig functions, we know that  (regardless if we use radians or degrees).

The answer is 

Knowing the centripetal force on the mass and the radius of the circle, we can calculate its velocity:

Rearranging for velocity:

We can use this to find the period of the mass:

Rearranging for period, we get:

A normal clock registers 60 seconds for every rotation of the minute hand. We need to determine the new period per rotation.

A normal clock registers the following amount of seconds every day:

Losing 1500 seconds every day, we now have:

The hand in question completes one rotation every minute, so we'll dive this new time by minutes per day:

Now dividing our two values to get seconds per rotation:

To start, we need to determine what exactly we are solving for. What does it mean for the string to be in tension at all points? This means that at some point in the circle, tension will equal zero; thus the force of gravity and the centripetal force will equal each other.

Expand these force expressions and simplify:

The expression for centripetal acceleration is:

We know  (the length of the string) and , but we need to develop an expression for velocity:

Substituting this back into the equation for centripetal acceleration, we get:

Rearrange for frequency:

We know all of these values, allowing us to solve:

Since the man is in space, the only force we have to worry about in this problem is the centripetal force, which results from the tension in the spring. Therefore, we are being asked what period gives us a centripetal force of .

We need an expression for velocity:

Substitute this back into the original expression:

Rearranging for period we get:

We know all of these values, allowing us to solve:

The ordinary frequency is the number of cycles per second. Since a second hand makes one revolution, or cycle, every 60s, the correct answer is . You can also think of the ordinary frequency as the angular velocity divided by .

We can begin with the conservation of energy to solve this problem:

The problem statement tells us that the cylinder is initially at rest, so we can eliminate initial kinetic energy. If we assume that the height of the cylinder when it reaches a period of 0.2s has a height of 0, we can eliminate final potential energy. Therefore, we get:

Expanding these terms and making sure we have both a linear and rotational component to kinetic energy, we get equation (1):

Before we move on, we know that we are going to have to calculate something that we can use to determine the period of the cylinder. We know that the period is how long it takes the cylinder to complete one full rotation. Thinking practically, we can use the circumference of the cylinder and linear velocity to determine period:

Using variables, we get equation:

Rearranging for final velocity, we get equation (2):

Now we know that the period is dependent on final linear velocity. We will come back to this equation. Now we can go back to equation (1) and begin substituting in expressions for unknown variables moving from left to right. The first variable we don't know is initial height. However, we can use the distance the cylinder traveled and the angle of the slope:

Rearranging for initial height, we get equation (3):

Moving on, the next unknown term is final velocity. We can substitute equation (2) that we already derived:

Moving on, the next unknown term is the moment of inertia. Using the expression for a cylinder to get equation (4):

Moving on, the final unknown term is final rotational velocity. We can use the relationship between this and linear velocity:

Now substituting equation (2), we get equation (5):

We can now substitute equations 2, 3, 4, and 5 into equation (1):

Eliminating mass from both sides of the equation and expanding each term:

Combining the terms on the right:

Rearranging for length:

Check your units and make sure you end up with seconds before moving on!

We know values for each variable, so time to plug and chug:

Finding distance of lap of inner car:

Convert  to :

Use the distance formula:

Inner car time:

Finding distance of lap of inner car:

Convert  to :

Use the distance formula:

Finding distance of lap of outer car:

Convert  to :

Use the distance formula: