4th Grade Science : Weather and Erosion Rate

Study concepts, example questions & explanations for 4th Grade Science

varsity tutors app store varsity tutors android store

Example Questions

Example Question #1 : Measure Effects Of Weathering On Rate Of Erosion

Miranda's class was investigating how weathering affected the rate of erosion. They put chunks of bar soap in an aluminum foil tray and filled it about halfway with water. They measured the soap after soaking for about three hours and then sprayed the bar of soap with a squeeze bottle full of water. They observed bits of soap breaking off and floating in the water. They took final measurements and recorded them in the data chart below.

Screen shot 2020 06 22 at 9.23.02 am

Based on this data, what had the most significant effect on the soap?

Possible Answers:

Soaking the bar of soap

Scraping the bar of soap

The effect is the same on the bar of soap

Spraying the bar of soap

Correct answer:

Spraying the bar of soap

Explanation:

This observation is focused on the effect that weathering has on the rate of erosion. As wind and water break bits of material off, that material is moved to a new location. When looking at the data, there was a 45cm3 difference between the bar of soap at the beginning of the investigation and the end of soaking. When they measured the soap after spraying, it only had a volume of 2cm3, which was a decrease of 78cm3. Using the data from the observations, it can be concluded that spraying the soap has a more significant impact on its size and volume.

Example Question #2 : Weather And Erosion Rate

Miranda's class was investigating how weathering affected the rate of erosion. They put chunks of bar soap in an aluminum foil tray and filled it about halfway with water. They soaked the soap for about three hours and then sprayed the bar of soap with a squeeze bottle full of water. Miranda noticed that when the soap was sitting in the water it was getting smaller but took a very long time. There was barely a change after the three hours. When they sprayed the bars of soap they broke down quickly and bits of soap began breaking off. They repeated the experiment with multiple bars of soap and saw the same results.

Screen shot 2020 06 22 at 9.23.02 am

Does this process take a long time and how does your data show you the evidence?

Possible Answers:

Yes, this process takes a long time. Miranda noted that the entire experiment took three hours to break down the soap.

No, this process does not take a long time. Miranda's class was very quickly able to see the effects of placing the soap in standing water.

Yes, this process takes a long time. Miranda noted that after three hours, there was barely a change in the soap.

No, this process does not take a long time. Miranda thought it would take many more hours, so waiting for three hours so see a little change wasn't too bad.

Correct answer:

Yes, this process takes a long time. Miranda noted that after three hours, there was barely a change in the soap.

Explanation:

The natural process of weathering and erosion happens very slowly, and this investigation was no different. After Miranda's class has placed the soap into the standing water, they waited three hours and barely saw a difference in the size and volume. There was only a 45cm3 difference in the volume after three hours. It was not until moving water by way of the spray bottles did things speed up. Had Miranda's class just left the soap to be eroded, it could have taken more than one school day to complete the process.

Example Question #3 : Weather And Erosion Rate

Miranda's class was investigating how weathering affected the rate of erosion. They put chunks of bar soap in an aluminum foil tray and filled it about halfway with water. They soaked the soap for about three hours and then sprayed the bar of soap with a squeeze bottle full of water. Miranda noticed that when the soap was sitting in the water, it was getting smaller but took a very long time. There was barely a change after the three hours. When they sprayed the bars of soap, they broke down quickly, and bits of soap began breaking off. They repeated the experiment with multiple bars of soap and saw the same results.

Screen shot 2020 06 22 at 9.23.02 am

What does this data tell you about moving water versus standing water and how it changes the landscape over time?

Possible Answers:

Moving water slows down the effect weathering has on erosion. It would change the landscape more slowly over time.

Moving water speeds up the effect weathering has on erosion. It would change the landscape more slowly over time.

Moving water slows down the effect weathering has on erosion. It would change the landscape more quickly over time.

Moving water speeds up the effect weathering has on erosion. It would change the landscape more quickly over time.

Correct answer:

Moving water speeds up the effect weathering has on erosion. It would change the landscape more quickly over time.

Explanation:

Over time the wind, ice, vegetation, and water wear away small bits and pieces of sediment, rock, and other natural materials. Erosion takes these bits of material and moves them to a new location. When reviewing the observations and data from Miranda's investigation, one may notice that running water (the spray bottle) eroded more material in a shorter period. When comparing moving water and standing water, there is a significant difference, and running water would change the landscape more quickly.

Example Question #4 : Weather And Erosion Rate

Scientists are studying different cliff faces and how their rates of erosion are affected by the slope of the rock formation. DJ thinks that the steeper the cliff, the higher or faster the rate of erosion will be. Matt says it will be the opposite, that the steeper the cliff is, the lower or slower the rate of erosion will be. They know gravity pulls rocks down, and this will have an effect on the cliff's erosion rate. Based on the data chart below, who is correct, and why?

Screen shot 2020 06 22 at 10.10.59 am

Possible Answers:

DJ is correct because when a cliff is steeper, it allows the force of gravity to move more rock faster.

Matt is correct because when a cliff is steeper, it does not allow the force of gravity to move more rock faster.

DJ is correct because erosion requires something to have been weathered by wind, water, ice, or vegetation, and these things can't affect a steeper slope.

Matt is correct because erosion requires something to have been weathered by wind, water, ice, or vegetation, and these things can't affect a lower slope.

Correct answer:

DJ is correct because when a cliff is steeper, it allows the force of gravity to move more rock faster.

Explanation:

DJ and Matt are both on the right track when they are thinking about rocks being pulled down and affected by gravity, but that is where the commonalities stop. DJ is correct in his thinking related to the steep rock cliffs. The steeper the cliff is, the sooner and faster it will be eroded. The steep slope allows the force of gravity to move more rock more quickly. When looking at the data, a trend can be seen, the higher the slope of the cliffside is, the sooner it will erode. A cliffside with a 30o slope will erode in 61 years compared to an 87o slope eroding in 24 years.

Example Question #5 : Weather And Erosion Rate

Scientists are studying different cliff faces and how their rates of erosion are affected by the slope of the rock formation. Meredith wants to come up with a way to extend the amount of time that it takes for a cliff face to be completely eroded. What can Meridith recommend doing after reviewing the relationship between slope and erosion rate in the table below?

Screen shot 2020 06 22 at 10.10.59 am

Possible Answers:

Building the cliffside up to increase the slope can decrease the amount of time it takes to erode.

Tearing the cliffside down to increase the slope can increase the amount of time it takes to erode.

Tear the cliffside down to reduce the slope can decrease the amount of time it takes to erode.

Building the cliffside up to reduce the slope can increase the amount of time it takes to erode.

Correct answer:

Building the cliffside up to reduce the slope can increase the amount of time it takes to erode.

Explanation:

Meredith can use this data table to look for a pattern or connection between the slope of the cliffside and the average erosion rate. Based on the measurements recorded, the lower the slope, the longer it takes for the cliff to erode. Meredith could suggest building the cliffside up to reduce the slope so that scientists could increase the amount of time it would take to erode. The steep slope allows the force of gravity to move more rock faster, so by reducing the slope, the rock will not move as quickly.

Example Question #1 : Measure Effects Of Weathering On Rate Of Erosion

The data table below shows the width of the beach measured every two years.

Screen shot 2020 09 11 at 11.03.11 am

What natural process is likely causing the beach to become shorter in width each year?

Possible Answers:

Weathering is breaking rocks apart

Plants are growing and covering the beach

Erosion from ocean waves is washing the sand away

New animals are moving to the shore

Correct answer:

Erosion from ocean waves is washing the sand away

Explanation:

The natural process of weathering and erosion happens very slowly. Over time the wind, ice, vegetation, and water wear away small bits and pieces of sediment, rock, and other natural materials. Erosion takes these bits of material and moves them to a new location. In this example, erosion due to the ocean waves crashing onto the beach is washing away sand, causing it to be slowly moved out to sea, and the beach becomes shorter in width.

Example Question #2 : Measure Effects Of Weathering On Rate Of Erosion

The data table below shows the width of the beach measured every two years.

Screen shot 2020 09 11 at 11.03.11 am

Based on the pattern, what will the width of the beach most likely be in year 11?

Possible Answers:

7.3 meters

7.1 meters

7.5 meters

6.9 meters

Correct answer:

7.3 meters

Explanation:

Over time the wind, ice, vegetation, and water wear away small bits and pieces of sediment, rock, and other natural materials. Erosion takes these bits of material and moves them to a new location. The beach is eroding at a rate of 0.02 meters every two years. It can be predicted that the trend will continue, and in year 11, the beach will be 7.3 meters wide.

Example Question #4 : Weather And Erosion Rate

True or False: The effects of weathering on the rate of erosion cannot be measured.

Possible Answers:

True

False

Correct answer:

False

Explanation:

Over time the wind, ice, vegetation, and water wear away small bits and pieces of sediment, rock, and other natural materials. Erosion takes these bits of material and moves them to a new location. The effects of weathering on the rate of erosion can be measured and often is to determine if reconstruction or human intervention is needed to stop the weathering and erosion in areas.

Example Question #1 : Weather And Erosion Rate

Which example is NOT a direct cause of erosion?

Possible Answers:

Wind

Water

Temperature

Gravity

Correct answer:

Temperature

Explanation:

Over time the wind, ice, vegetation, and water wear away small bits and pieces of sediment, rock, and other natural materials. Erosion takes these bits of material and moves them to a new location. Wind, water, and gravity can all move bits of broken rock and sediment. Temperature is not a direct cause of erosion. It plays an effect in the freezing and melting of water during the weathering process that breaks rocks apart.

Example Question #1 : Measure Effects Of Weathering On Rate Of Erosion

What is the best scientific method for determining if erosion is taking place?

Possible Answers:

None of the answer choices are correct.

Take measurements over time

Take photographs 

All of the answer choices are correct.

Write detailed observations of the area

Correct answer:

All of the answer choices are correct.

Explanation:

Over time the wind, ice, vegetation, and water wear away small bits and pieces of sediment, rock, and other natural materials. Erosion takes these bits of material and moves them to a new location. Measuring the area over time, taking photographs for comparison, and writing detailed observations are scientific methods for determining if erosion is taking place.

Learning Tools by Varsity Tutors