This is an example of a phase change physical reaction at the liquid-solid interface. There is no change in the organization of chemical bonds; therefore, it is not an example of a chemical reaction. There is also no change in the bonding partners of the constituent oxygen and hydrogen atoms of water. As a result, there is no change in oxidation numbers.  Without a change in oxidation number values, it is not a redox reaction.

The critical point is defined by the highest temperature and highest pressure at which a substance exists in distinct liquid and gas phases. Beyond this point, there is no distinction between the liquid and gaseous phases.

The temperature and pressure at which a substance may exist in equilibrium between the solid, liquid, and gas phases is known as the triple-point.

Point D occurs at the intersection of the three segments, and is called the triple point. All three phases (solid, liquid, and gas) co-exist at the triple point.

Point B corresponds to the critical point. The freezing and boiling points are dependent on pressure, and are depicted as the lines between regions 1 and 2 (freezing) and between regions 2 and 3 (boiling).

Point D is called the triple point. At the triple point, all three phases (solid, liquid, and gas) co-exist. The processes that are occurring are condensation and vaporization, sublimation and deposition, and freezing and melting.

Condensation and vaporization allow liquid and gas to co-exist. Sublimation and deposition allow solid and gas to co-exist. Freezing and melting allow solid and liquid to co-exist. In these terms, it makes sense that all six processes occur at the triple point.

Point B occurs at the highest pressure and temperature point on the phase diagram. This point is called the critical point, meaning that at temperatures and pressures beyond this point separate gas and liquid phases do not exist. 

Point B is known as the critical point. While identifying this point on the phase diagram is important, it is also important to know that at temperatures and pressures above the critical point, the solution is called a supercritical fluid, meaning that separate gas and liquid phases do not exist. 

First, it is important to identify what phases are occurring on each side of the line on which Point A rests. In section 1, the pressure is high and the temperature low, meaning the solution is a solid. In section two, both the pressure and temperature are intermediate, meaning the solution is a liquid. In other words, the segment that Point A is on is the equilibrium line between solid and liquid, thus, melting and freezing are occurring at Point A. 

First, it is important to identify what phases are occurring on each side of the line on which Point C rests. In section two, both the pressure and temperature are intermediate, meaning the solution is a liquid. In section three, both the pressure and temperature are high, meaning the solution is a gas. In other words, the segment that Point C is on is the equilibrium line between liquid and gas, thus, vaporization and condensation are occurring at Point C. 

First, it is important to identify what phases are occurring on each side of the line on which Point E rests. In section 1, the pressure is high and the temperature low, meaning the solution is a solid. In section three, both the pressure and temperature are high, meaning the solution is a gas. In other words, the segment that Point E is on is the equilibrium line between solid and gas, thus, deposition and sublimation are occurring at Point E. 

While this may seem like an obscure question, the MCAT specifically requires you to know the shape of the water phase diagram. Unique to only a few molecules, the solid phase in our diagram is less dense than the liquid phase, meaning that the solid/liquid phase line has a negative slope (this can be seen as segment AD in the above image). Water is one of the select few compounds with this characteristic.