All Human Anatomy and Physiology Resources
Example Questions
Example Question #11 : Muscle Physiology
Which of the following are characteristics of only skeletal muscle?
Striated
Calcium required for contraction
Multinucleated
Troponin-tropomyosin complex regulates contraction
Multinucleated
Characteristics of smooth muscle include: striated, somatic innervation, multinucleated, and requiring calcium for contraction. Furthermore, similar characteristics are seen in cardiac muscle such as: striations, autonomic innervation, 1-2 nuclei, requires calcium for contraction. Finally, smooth muscle is nonstriated, has autonomic innervation, mononucleated, and requiring calcium for contraction.
Example Question #12 : Muscle Physiology
To which of the following molecules does calcium released from the sarcoplasmic reticulum bind?
Actin
Tropomyosin
Troponin
Myosin
Troponin
Calcium is released from the sarcoplasmic reticulum into the the sarcoplasm. It binds the troponin molecules on the thin filaments, causing the strands of tropomyosin to shift, exposing the myosin-binding sites on the thin filaments.
Example Question #12 : Muscle Physiology
Where is calcium stored in the skeletal muscle cell?
Calcium is stored extracellularly, and only allowed into the skeletal muscle cell after neuronal signals.
Calcium is stored in the cytoplasm, awaiting a signal for release into the cytoplasm.
Calcium is stored in the sarcoplasmic reticulum, awaiting a signal for release into the cytoplasm.
Calcium is not particularly stored in any location in the skeletal muscle cell, and is equally distributed.
None of the answers are correct.
Calcium is stored in the sarcoplasmic reticulum, awaiting a signal for release into the cytoplasm.
Calcium is stored in the sarcoplasmic reticulum at high concentrations. When neurons signal the contraction of muscle, calcium is released from the sarcoplasmic reticulum, and facilitates the contraction of muscle fibers and ATP hydrolysis, to generate muscle contraction force.
Example Question #1071 : Human Anatomy And Physiology
The perimysium surrounds which of the following parts of a skeletal muscle fiber?
myofibril
myofiber
muscle
myofilament
fascicle
fascicle
The perimysium surrounds the fascicles in a skeletal muscle fiber. From largest to smallest, the sequence goes as follows: the Epimysium surrounds the entire muscle; the Perimysium surrounds the fascicles inside the muscle; the Endomysium surrounds the myofiber (muscle cell).
Example Question #1 : Help With Muscle Proteins And Signals
In malignant hyperthermia, general anesthesia triggers an uncontrolled increase in skeletal muscle metabolism, which causes the body to generate heat faster than it can cool down and use up the body’s store of oxygen. Dantrolene is the medication used to treat this condition, as it will block increases in intracellular calcium. What is the role of calcium in muscle contraction?
Speed up conduction of action potentials
Release acetylcholine into the synaptic cleft
Bind to troponin to uncover actin binding sites
Stabilize the cell membrane of skeletal muscle cells
Bind to actin and slide it to shorten the muscle
Bind to troponin to uncover actin binding sites
For skeletal muscle contraction, calcium binds to troponin to uncover actin binding sites.
In order for skeletal muscle contraction to occur, the protein myosin needs to bind to the protein actin and slide it to decrease the length of the sarcomere, which is the contractile unit of a muscle. At rest, the sites on actin that myosin needs to bind to are covered up by the protein tropomyosin. Troponin is a protein that is attached to tropomyosin, to which calcium can bind.
When an action potential reaches a muscle cell, it travels down T-tubules to reach the sarcoplasmic reticulum. The sarcoplasmic reticulum releases stores of calcium, which bind to troponin. This binding causes a conformational change in troponin that causes it to shift the position of the attached tropomyosin to uncover binding sites on actin. Myosin is then able to bind and contraction can occur.
Myosin binds to actin and slides it to shorten the sarcomere. Secretory vesicles release acetylcholine into the synaptic cleft upon stimulation of the presynaptic neuron. This stimulation causes an influx of calcium at the axon terminal, but is not directly linked to increases in intracellular calcium of the muscle cell. Dystrophin is the protein that stabilizes the cell membrane of skeletal muscles. Myelination of axons speeds up conduction of action potentials.
Example Question #2 : Help With Muscle Proteins And Signals
After the New Year, you decide to make a resolution to exercise more and you enthusiastically wake up early in the cold morning to go for a run. You feel great initially, but ten minutes into your run, you feel a disabling pain in your right calf that forces you to stop and sit on the curb. You feel your calf spasming and note that your toes are pointed downward. You are unable to change this position and think that you have a muscle cramp. A few minutes later the pain subsides and you are able to move your foot again. What molecular deficiency is responsible for this condition?
Calcium
ATP
Potassium
Acetylcholine
Sodium
ATP
A deficiency of ATP is the main cause of skeletal muscle cramps.
During the anaerobic phase of exercise, ATP is quickly used up before cellular respiration can kick in. Muscle contraction requires myosin to bind to actin and slide it for sarcomere shortening. Attachment of ADP and inorganic phosphate to the myosin head causes it to bind to actin. Release of ADP and inorganic phosphate causes the myosin head to bend and pull on actin. Binding of ATP to myosin is needed for myosin to release its hold on actin. Hydrolysis of ATP to ADP and inorganic phosphate causes myosin to bind to actin again.
When ATP stores are depleted, myosin is unable to detach from actin so that skeletal muscle is "stuck" in its position. During this cramping period, the affected muscle cannot move and attempting to forcefully do so may tear it. As you rest and replete your ATP stores, myosin will be able to release from actin and the muscle can shorten or lengthen again.
While electrolyte deficiencies can also cause muscular weakness and cramping, this only happens when they are depleted during excessive sweating and rehydration with plain water. Sweating causes loss of electrolytes and intake of water will dilute the concentration of existing electrolytes. Hyponatremia and hypocalcemia are the main causes of electrolyte-deficiency cramps. Deficiency of acetylcholine can cause muscular weakness as seen in myasthenia gravis or botulism.
Example Question #1 : Help With Muscle Proteins And Signals
What protein must undergo a conformational change so that myosin can be attached to actin?
Titin
Collagen
ATP
Troponin
Tropomyosin
Tropomyosin
Actin houses binding sites for myosin that must be covered when a muscle is not contracting; otherwise myosin would constantly attach to actin, initiating unstimulated contraction. When calcium is released from the sarcoplasmic reticulum, it attaches to troponin. The troponin then causes a conformational change in tropomyosin. This change alters the orientation of tropomyosin away from the binding site on action. With the binding site revealed, myosin can adhere to the actin filament and contract the sarcomere.
Titin spans the length of the sarcomere and plays a key role in maintaining muscle elasticity. Collagen provides tensile strength around the muscles, and is mostly found in the extracellular matrix. ATP is not a protein, and is used to provide energy for the contraction process.
Example Question #2 : Help With Muscle Proteins And Signals
Where within the sarcomere is the ATPase?
Sarcoplasmic reticulum
Transverse tubules
A band
Thick filaments
Sarcoplasmic reticulum
The sarcoplasmic reticulum within a muscle cells is where many calcium ions are stored and released. The release of calcium is a required step in muscle contraction. The ryanodine receptor pumps calcium ions from the intracellular fluid into the interior of the sarcoplasmic reticulum, this process keeps the intracellular calcium ions low, provides a quick store of calcium, and creates a concentration gradient. The sarcoplasmic reticulum membrane contains calcium ion/ATPase pumps. This pump transports intracellular calcium ions into the sarcoplasmic reticulum.
Example Question #3 : Help With Muscle Proteins And Signals
What is the role of parvalbumin during a muscle contraction?
Parvalbumin acts as a slow-releasing buffer of calcium that is released from the sarcoplasmic reticulum.
Parvalbumin, when bound to ATP, prevents the release of calcium from the sarcoplasmic reticulum
Parvalbumin only exists in the bloodstream, and is not related to muscle contraction.
Parvalbumin causes the release of calcium from the sarcoplasmic reticulum.
Parvalbumin irreversibly binds calcium, preventing excess muscle contraction.
Parvalbumin acts as a slow-releasing buffer of calcium that is released from the sarcoplasmic reticulum.
Parvalbumin is a protein related to albumin, which is found in the blood. Parvalbumin plays a different role though, and is found in the muscle. Parvalbumin exists in muscle cytoplasm, and binds reversibly with calcium that is released from the sarcoplasmic reticulum during the muscle contraction process. Parvalbumin binding calcium is exothermic and produces labile heat. Parvalbumin then slowly releases calcium back into the cytoplasm. This makes parvalbumin a slow-releasing calcium buffer.
Example Question #4 : Help With Muscle Proteins And Signals
What is the role of phosphocreatine (PCr) in maintaining ATP concentrations during muscle contraction?
PCr signals the release of ATP from the sarcoplasmic reticulum during muscle contraction, maintaining high ATP concentration during the contractive process.
PCr does not influence ATP concentrations during muscle contraction.
AQP (adenosine quadphosphate) is made into ATP via transfer of a high energy phosphate from AQD to Cr. This reaction is: AQP + Cr -> ATP + PCr
ATP that is broken down into ADP is regenerated into ATP via transfer of phosphate from PCr to ADP. This reaction is: PCr + ADP -> ATP + Cr
ADP that is broken down into AMP is regenerated into ATP via transfer of phosphate from PCr to AMP. This reaction is: 2PCr + AMP -> ATP + 2Cr
ATP that is broken down into ADP is regenerated into ATP via transfer of phosphate from PCr to ADP. This reaction is: PCr + ADP -> ATP + Cr
PCr or phosphocreatine works to maintain ATP concentrations during muscle contraction and use. It does so by transferring its phosphate group to ADP, which is the product of ATP breakdown. When ATP is broken down to ADP, PCr donates a phosphate to ADP to recreate an ATP. This reaction, PCr + ADP -> ATP + Cr, is catalyzed by the enzyme CPK.
Certified Tutor
Certified Tutor