ACT Science : ACT Science

Study concepts, example questions & explanations for ACT Science

varsity tutors app store varsity tutors android store varsity tutors ibooks store

Example Questions

Example Question #5 : How To Find Data Representation In Earth And Space Sciences

A scientist observes the motion of stars, planets, and other objects in deep space through a high-powered telescope. She observes that these objects all appear to be moving away from the Earth and graphs her results comparing their velocities, in kilometers per second, and their proper distance, in megaparsecs.

 

 

Hubble_graph

A star is measured to be 12 megaparsecs away. What should its velocity be?

Possible Answers:

Correct answer:

Explanation:

Based on the graph, an object 12 megaparsecs away should have a velocity a little bit more than 800 km/s. The closest answer is 825 km/s.

Example Question #153 : Earth And Space Sciences

The chart below depicts the average rainfall by location on the Earth.  Zero degrees latitude corresponds to the equator.  Positive latitudes are north of the equator, while negative latitudes are south of the equator.  A latitude with a magnitude of 90 degrees correlates with one of Earth's poles.  
Rainfall

Which of the following best describes the rainfall trend shown in the graph?

Possible Answers:

Rainfall is greatest near the equator and least at Earth’s poles

Rainfall is greatest in the Northern hemisphere

Peak rainfall occurs at about  degrees

Rainfall is greatest at Earth’s poles and declines gradually as latitudes approach 0 degrees

Correct answer:

Rainfall is greatest near the equator and least at Earth’s poles

Explanation:

Peak rainfall occurs around the equator (zero degrees).  The lowest points occur at the poles ( and  degrees).

Example Question #2 : How To Find Data Representation In Earth And Space Sciences

Scientists have long debated the origin of organic molecules on Earth.  Organic molecules are those based on the atom carbon, which can form four distinct bonds in contrast to the fewer number allowed in most other non-metals.  As a result of this property, carbon can give rise to the enormously complex molecular shapes necessary for life to arise.

Some scientists argue that organic matter was dissolved in water ice on comets, and brought to Earth early in its history. These comets crashed into the early Earth, and deposited carbon-based molecules in copious quantities to the Earth’s surface as their water melted.

In 2014, the first space probe landed on the comet 67P/Churyumov-Gerasimenko. Suppose that scientists find the following information from 5 distinct samples after landing on the comet. Each sample was taken at a single geographical location, but 5 meters deeper than the last.  Sample 1 was taken at a depth of 1 meter below the surface.

Sample #

Water Ice?

Concentration of Organics

1

No

N/A

2

Yes

1 mg/L

3

No

N/A

4

Yes

4 mg/L

5

Yes

10 mg/L

These samples were compared to 5 similar samples from the surface of Mars.  Scientists posited that this comparison would be meaningful because we know that life does not exist on Mars the same way that it does on Earth.  Thus, they are comparing a known non-biological celestial body, Mars, with another celestial body, the comet, which may be seeding life on suitable plants.

Sample #

Water Ice?

Concentration of Organics

1

No

N/A

2

No

N/A

3

No

N/A

4

No

N/A

5

Yes

1 mg/L

The units expressing the concentration of organic molecules in the samples from Mars and comet are in mg/L.  This unit is most precisely a measure of:

Possible Answers:

Mass

Density

Specific Gravity

Volume

Weight

Correct answer:

Density

Explanation:

The unit mg/L is measuring mass (mg) for a certain number of volume units (L).  As a result, this expression is a measurement of density.

Example Question #8 : How To Find Data Representation In Earth And Space Sciences

Scientists studying historical trends in climate change have a number of tools at their disposal. One method of analyzing paleoclimate data involves the use of fossilized pollen spores embedded in sediment. Pollen spores are specific to the plant that produced them. Because the spores are resilient and are widely-distributed by wind, they provide a snapshot of the vegetation that was widespread at a particular point in time. By identifying the age of a sample and the composition of the various spores, scientists can identify the prominent vegetation and use this information to gain insight into the climate at the time the spores were deposited.

Scientists took sediment samples from various depths of a lakebed. They found that five types of pollen spores make up the majority of spore deposits in each sample. In Table 1, plants are listed along with the respective temperature ranges and levels of precipitation for the areas in which they are commonly found. Table 2 shows the composition of the assortment of spores in each of the four samples taken by the scientists.

Pollen_table_1

Pollen_table_2

Which plant is most tolerant of low levels of precipitation?

Possible Answers:

Plant E

Plant D

Plant C

Plant A

Correct answer:

Plant E

Explanation:

Table 1 lists the types of plants. The third column (labeled "Precipitation") shows the annual precipitation where each plant is commonly found. The lowest annual precipitation is associated with Plant E.

Screenshot_2015-02-16_at_6.23.32_pm

Example Question #9 : How To Find Data Representation In Earth And Space Sciences

Scientists studying historical trends in climate change have a number of tools at their disposal. One method of analyzing paleoclimate data involves the use of fossilized pollen spores embedded in sediment. Pollen spores are specific to the plant that produced them. Because the spores are resilient and are widely-distributed by wind, they provide a snapshot of the vegetation that was widespread at a particular point in time. By identifying the age of a sample and the composition of the various spores, scientists can identify the prominent vegetation and use this information to gain insight into the climate at the time the spores were deposited.

Scientists took sediment samples from various depths of a lakebed. They found that five types of pollen spores make up the majority of spore deposits in each sample. In Table 1, plants are listed along with the respective temperature ranges and levels of precipitation for the areas in which they are commonly found. Table 2 shows the composition of the assortment of spores in each of the four samples taken by the scientists.

Pollen_table_1

Pollen_table_2

The climate associated with Sample 2 could most likely be described as which of the following?

Possible Answers:

Temperature: High

Precipitation: High

Temperature: High

Precipitation: Moderate

Temperature: Low

Precipitation: Moderate

Temperature: Moderate

Precipitation: High

Correct answer:

Temperature: High

Precipitation: Moderate

Explanation:

Information about Sample 2 can be found in Table 2. The most prevalent plant spore for that sample is Plant A.  

Screenshot_2015-02-16_at_6.34.26_pm

Based on the information in Table 1, it is evident that Plant A grows best in high temperatures with moderate rainfall.

Example Question #154 : Earth And Space Sciences

Scientists studying historical trends in climate change have a number of tools at their disposal. One method of analyzing paleoclimate data involves the use of fossilized pollen spores embedded in sediment. Pollen spores are specific to the plant that produced them. Because the spores are resilient and are widely-distributed by wind, they provide a snapshot of the vegetation that was widespread at a particular point in time. By identifying the age of a sample and the composition of the various spores, scientists can identify the prominent vegetation and use this information to gain insight into the climate at the time the spores were deposited.

Scientists took sediment samples from various depths of a lakebed. They found that five types of pollen spores make up the majority of spore deposits in each sample. In Table 1, plants are listed along with the respective temperature ranges and levels of precipitation for the areas in which they are commonly found. Table 2 shows the composition of the assortment of spores in each of the four samples taken by the scientists.

Pollen_table_1

Pollen_table_2

Assuming Samples 1 through 4 are arranged chronologically, from oldest to most recent, what can be inferred about the change in temperature across the eras that they cover?

Possible Answers:

No pattern

Temperatures increased

Precipitation increased

Temperatures decreased

Correct answer:

No pattern

Explanation:

By identifying the predominant type(s) of plant in each sample in Table 2, you can characterize the temperature of each respective era as Warm, Moderate, or Cool.

Screenshot_2015-02-16_at_9.45.38_pm

As shown above, temperature increases between Samples 1 and 2, decreases between Samples 2 and 3, and finally increases slightly between Samples 3 and 4. Because temperature neither increases nor decreases consistently across each era, no pattern can be identified regarding the trend in temperature change.

Example Question #11 : How To Find Data Representation In Earth And Space Sciences

Study 1

A student wishes to study the effects of various household detergents on the mortality of a certain type of bacteria over an extended period of time. She introduces that type of bacteria to four separate agar plates (labeled Plate 1, Plate 2, Plate 3, and Plate 4), and then allows the bacteria to grow for three days. After this period, she treats Plate 1 with water, Plate 2 with Detergent X, Plate 3 with Detergent Y, and Plate 4 with Detergent Z. She then counts the number of bacterial colonies on each plate every eight hours for the next twenty-four hours.

Table 1

 Screen_shot_2015-03-12_at_6.12.46_pm

Study 2

The student now wishes to compare the effects of Detergent X and Detergent Y on the same type of bacteria as she used in Study 1. The student introduces that type of bacteria to three separate plates (labeled Plate I, Plate II, and Plate III), and then allows the bacteria to grow for 3 days. After this period, she treats Plate I with water, Plate II with Detergent X, and Plate III with Detergent Y. She then counts the number of bacterial colonies on each plate every eight hours for the next forty-eight hours.

Screen_shot_2015-03-12_at_6.12.32_pm

In Study 1, which detergent killed the greatest number of bacteria in total during the twenty-four hours of the experiment?

Possible Answers:

Detergent Z

Detergent X

Detergent Y

All of the detergents killed the same number of bacteria.

Correct answer:

Detergent Y

Explanation:

Looking at the table, if we subtract the final number of colonies from the initial number of colonies for each plate, we find that Plate 3 has the largest difference. Plate 3 corresponds to Detergent Y, so Detergent Y killed the greatest number of bacteria in total during the experiment involved in Study 1.

Example Question #161 : Earth And Space Sciences

Study 1

A student wishes to study the effects of various household detergents on the mortality of a certain type of bacteria over an extended period of time. She introduces that type of bacteria to four separate agar plates (labeled Plate 1, Plate 2, Plate 3, and Plate 4), and then allows the bacteria to grow for three days. After this period, she treats Plate 1 with water, Plate 2 with Detergent X, Plate 3 with Detergent Y, and Plate 4 with Detergent Z. She then counts the number of bacterial colonies on each plate every eight hours for the next twenty-four hours.

Table 1

 Screen_shot_2015-03-12_at_6.12.46_pm

Study 2

The student now wishes to compare the effects of Detergent X and Detergent Y on the same type of bacteria as she used in Study 1. The student introduces that type of bacteria to three separate plates (labeled Plate I, Plate II, and Plate III), and then allows the bacteria to grow for 3 days. After this period, she treats Plate I with water, Plate II with Detergent X, and Plate III with Detergent Y. She then counts the number of bacterial colonies on each plate every eight hours for the next forty-eight hours.

Screen_shot_2015-03-12_at_6.12.32_pm

In Study 1, what was the most likely number of bacterial colonies on Plate 4 at 12 hours after the start of the experiment?

Possible Answers:

42

70

59

50

Correct answer:

50

Explanation:

From inspection of the table, we see that the number of bacterial colonies on Plate 4 decreases linearly—roughly 20 colonies are killed every eight hours. Knowing this, we can reason that the number of colonies at twelve hours is roughly 50 (about halfway between 42 and 60).

Example Question #13 : How To Find Data Representation In Earth And Space Sciences

Study 1

A student wishes to study the effects of various household detergents on the mortality of a certain type of bacteria over an extended period of time. She introduces that type of bacteria to four separate agar plates (labeled Plate 1, Plate 2, Plate 3, and Plate 4), and then allows the bacteria to grow for three days. After this period, she treats Plate 1 with water, Plate 2 with Detergent X, Plate 3 with Detergent Y, and Plate 4 with Detergent Z. She then counts the number of bacterial colonies on each plate every eight hours for the next twenty-four hours.

Table 1

 Screen_shot_2015-03-12_at_6.12.46_pm

Study 2

The student now wishes to compare the effects of Detergent X and Detergent Y on the same type of bacteria as she used in Study 1. The student introduces that type of bacteria to three separate plates (labeled Plate I, Plate II, and Plate III), and then allows the bacteria to grow for 3 days. After this period, she treats Plate I with water, Plate II with Detergent X, and Plate III with Detergent Y. She then counts the number of bacterial colonies on each plate every eight hours for the next forty-eight hours.

Screen_shot_2015-03-12_at_6.12.32_pm

A student obtains a mystery detergent of unknown identity and decides to perform an experiment with it. He starts with 80 bacterial colonies on a single plate, and observes that only 2 colonies remain at 40 hours following treatment with the detergent. What is the most likely identity of this detergent?

Possible Answers:

Cannot be determined

Detergent X

Detergent Y

Neither Detergent X nor Detergent Y

Correct answer:

Detergent X

Explanation:

From the graph associated with Study 2, we see that about 2 colonies remain on Plate II roughly 40 hours following treatment. Plate II contains Detergent X. 

Example Question #11 : How To Find Data Representation In Earth And Space Sciences

Glaciers move, on average, 1 meter per day, although many are known to move faster or slower depending on their size. Whether they are alpine glaciers, which form high in the mountains, or continental glaciers that cover huge areas of land near the poles, glaciers are responsible for breaking up rock and moving sediment as they move across the land. 

Below is a chart of average speed of movement of an alpine glacier per year, as well the amount of sediment displaced by the glacier. 

Year

Average Glacial Movement

Sediment movement per year (tons)

1995

1.1 m/day

2.2

1996

1.3 m/day

2.6

1997

1.5 m/day

3.0

1998

1.3 m/day

2.2

2000

1.1 m/day

1.8

2005

1.0 m/day

1.6

2010

0.9 m/day

1.5

Two scientists have done research on an alpine lake that lies in the path of the glacier. Each took five samples of sediment from the lake.

Scientist 1 believes that the glacier is beginning to melt as it moves lower in elevation, releasing some of the sediment it has carried into mountain streams and springs, causing the makeup of sediments in the lake to change. He notes that the sediment from the lake bed contains brown chert, a rock that can only be found in elevations higher than that of the lake. Scientist 1 took his sample from the sediments that washed ashore on the beach of the lake.

Scientist 2 believes the glacier is not melting, but displacing rock beds so that the sediment loosens and breaks free of the bedrock and then is carried by wind and other erosive elements to the lake. He notes that the sediment from the lake bed contains only trace amounts of the brown chert, not enough to suggest the glacier is melting. Scientist 2 took his samples from sediment deposits at the bottom of the lake. 

Below is a chart of the sediment collection samples and the percentage of brown chert found in each.

Sample #

Scientist 1: % Brown Chert

Scientist 2: % Brown Chert

1

5.2

0.9

2

7.1

1.2

3

6.3

0.4

4

6.5

0.8

5

5.8

1.0

 

If there are 2000 pounds per ton, how many pounds of sediment, approximately, did the glacier move per day in 1997?

Possible Answers:

4.0

4000

21.4

165

16.5

Correct answer:

16.5

Explanation:

In 1997, the glacier moved 3.0 tons of sediment, or 6000 pounds. Simply convert the answer to days instead of years like thus: 

6000lbs per year/ 365 days per year = 16.44 pounds per day. The closest answer is 16.5

Learning Tools by Varsity Tutors