Fundamental Macromolecules and Concepts - Biochemistry
Card 0 of 960
Which intermolecular force would be the result of a polar molecule generating a dipole in a nearby nonpolar molecule?
Which intermolecular force would be the result of a polar molecule generating a dipole in a nearby nonpolar molecule?
A polar molecule has both positive and negative ends. This dipole can interact in many ways with other molecules, both polar and non-polar. If it interacts with a neighboring nonpolar molecule, there is an induced dipole within that neighbor resulting in a dipole-induced dipole force.
A polar molecule has both positive and negative ends. This dipole can interact in many ways with other molecules, both polar and non-polar. If it interacts with a neighboring nonpolar molecule, there is an induced dipole within that neighbor resulting in a dipole-induced dipole force.
Compare your answer with the correct one above
Which statement about biomolecules is false?
Which statement about biomolecules is false?
Biomolecules contain carbon as their key element, and they mostly contain nonmetallic elements. For example, the human body is about 65% oxygen, 20% carbon, 10% hydrogen, and 3% nitrogen - the remaining major elements that make up the human body are calcium, phosphorous, magnesium, sulfur, potassium, sodium, chlorine, and other trace elements like iron and copper. Ionic bonds are rare in biomolecules, as most biomolecules are bound via covalent bonds. Also, to create a specific biomolecule, many of the bonds must be in specific orientations-specific stereoisomers are important, especially with enzymes.
Biomolecules contain carbon as their key element, and they mostly contain nonmetallic elements. For example, the human body is about 65% oxygen, 20% carbon, 10% hydrogen, and 3% nitrogen - the remaining major elements that make up the human body are calcium, phosphorous, magnesium, sulfur, potassium, sodium, chlorine, and other trace elements like iron and copper. Ionic bonds are rare in biomolecules, as most biomolecules are bound via covalent bonds. Also, to create a specific biomolecule, many of the bonds must be in specific orientations-specific stereoisomers are important, especially with enzymes.
Compare your answer with the correct one above
Which molecule has polar bonds but is not itself polar?
Which molecule has polar bonds but is not itself polar?
In
, each
bond is polar, as oxygen is much more electronegative than carbon. However, these dipole moments are equal in charge and this molecule is linear with carbon in the middle, so the entire molecule is nonpolar.
In water, oxygen is more electronegative than hydrogen; thus, electrons are pulled toward the oxygen atoms more than towards hydrogen atoms. This gives oxygen a partial negative charge and hydrogen a partial positive charge. The entire molecule is polar since water's molecular geometry is bent.
Methane includes a carbon with a hydrogen attached to each of its four bonds. Electrons are distributed relatively equally across each bond since the electronegativities of hydrogen and carbon are comparable, and the entire molecule is tetrahedral. Thus, neither the individual bonds nor the entire molecule are polar.
In
, nitrogen is left with a lone pair of electrons after it bonds with three hydrogen atoms. Because of this lone pair, the molecular geometry is trigonal pyramidal and the entire molecule is polar with the nitrogen atom being slightly negative (high electronegativity) and the hydrogen atoms being slightly positive.
In , each
bond is polar, as oxygen is much more electronegative than carbon. However, these dipole moments are equal in charge and this molecule is linear with carbon in the middle, so the entire molecule is nonpolar.
In water, oxygen is more electronegative than hydrogen; thus, electrons are pulled toward the oxygen atoms more than towards hydrogen atoms. This gives oxygen a partial negative charge and hydrogen a partial positive charge. The entire molecule is polar since water's molecular geometry is bent.
Methane includes a carbon with a hydrogen attached to each of its four bonds. Electrons are distributed relatively equally across each bond since the electronegativities of hydrogen and carbon are comparable, and the entire molecule is tetrahedral. Thus, neither the individual bonds nor the entire molecule are polar.
In , nitrogen is left with a lone pair of electrons after it bonds with three hydrogen atoms. Because of this lone pair, the molecular geometry is trigonal pyramidal and the entire molecule is polar with the nitrogen atom being slightly negative (high electronegativity) and the hydrogen atoms being slightly positive.
Compare your answer with the correct one above
While certain bonds within a polypeptide chain are able to rotate, the actual conformations found in nature are limited. What is a major factor limiting the available conformations?
While certain bonds within a polypeptide chain are able to rotate, the actual conformations found in nature are limited. What is a major factor limiting the available conformations?
While the peptide bond in a polypeptide chain is locked and unable to rotate, the amino nitrogen-alpha carbon bond can rotate. Additionally, the alpha carbon-carboxyl carbon can rotate as well.
However, like in many other molecules, the cis conformation is energetically unfavorable due to steric hindrance. This steric hindrance occurs when the side chains of two residues are right next to each other within the polypeptide. This is unfavorable, and the trans conformation is therefore preferred.
While the peptide bond in a polypeptide chain is locked and unable to rotate, the amino nitrogen-alpha carbon bond can rotate. Additionally, the alpha carbon-carboxyl carbon can rotate as well.
However, like in many other molecules, the cis conformation is energetically unfavorable due to steric hindrance. This steric hindrance occurs when the side chains of two residues are right next to each other within the polypeptide. This is unfavorable, and the trans conformation is therefore preferred.
Compare your answer with the correct one above
Two-tailed amphiphiles in high concentrations form .
Two-tailed amphiphiles in high concentrations form .
An amphiphile is a molecule that contains both polar and nonpolar groups. Two tailed amphiphiles form bilayer vesicles, whereas one tailed amphiphiles in high concentrations form micelles.
An amphiphile is a molecule that contains both polar and nonpolar groups. Two tailed amphiphiles form bilayer vesicles, whereas one tailed amphiphiles in high concentrations form micelles.
Compare your answer with the correct one above
Once inside a potassium channel, a
ions sheds the water molecules surrounding it in order to continue through. How is the
ion now stabilized within the channel?
Once inside a potassium channel, a ions sheds the water molecules surrounding it in order to continue through. How is the
ion now stabilized within the channel?
Free floating
is surrounded by water molecules which stabilize its positive charge. However, once these water molecules are shed due to movement through the potassium channel, something else must stabilize the positively charged
ion. This is accomplished via an amino acid stretch with negatively charged residues. The amino acid stretch responsible for the stabilization is Thr-Val-Gly-Tyr-Gly.
Free floating is surrounded by water molecules which stabilize its positive charge. However, once these water molecules are shed due to movement through the potassium channel, something else must stabilize the positively charged
ion. This is accomplished via an amino acid stretch with negatively charged residues. The amino acid stretch responsible for the stabilization is Thr-Val-Gly-Tyr-Gly.
Compare your answer with the correct one above
What is an enantiomer?
What is an enantiomer?
Enantiomers have the same chemical bonds in different configurations that are non-superimposable mirror images of each other. They differ in their configuration at all chiral centers.
Enantiomers have the same chemical bonds in different configurations that are non-superimposable mirror images of each other. They differ in their configuration at all chiral centers.
Compare your answer with the correct one above
What are van der Waals interactions?
What are van der Waals interactions?
van der Walls interactions are weak attractive interactions that occur between any two atoms in close enough proximity for their electron clouds to interact.
van der Walls interactions are weak attractive interactions that occur between any two atoms in close enough proximity for their electron clouds to interact.
Compare your answer with the correct one above
Which substance do you expect to be most soluble in water?
Which substance do you expect to be most soluble in water?
Ammonia, NH3, will be the most soluble in water simply because polar substances dissolve in polar solvents. This follows the principle that "like dissolves like." Ammonia and water are both polar due to the presence of lone pairs of electrons combined with a lack of geometrical symmetry (water is bent and ammonia is trigonal pyramidal).
Carbon dioxide and nitrogen are linear, negating any potential polarity. Methane is tetrahedral, and lacks any polarized bonds. Carbon trioxide is tigonal planar, negating polar interactions due to symmetry.
Ammonia, NH3, will be the most soluble in water simply because polar substances dissolve in polar solvents. This follows the principle that "like dissolves like." Ammonia and water are both polar due to the presence of lone pairs of electrons combined with a lack of geometrical symmetry (water is bent and ammonia is trigonal pyramidal).
Carbon dioxide and nitrogen are linear, negating any potential polarity. Methane is tetrahedral, and lacks any polarized bonds. Carbon trioxide is tigonal planar, negating polar interactions due to symmetry.
Compare your answer with the correct one above
What is true about the solubility of electrolytes in water?
What is true about the solubility of electrolytes in water?
Electrolytes readily dissolve and ionize in water. The term "electrolyte" refers to a molecule that will produce ions in solution, and can be synonymous with "salt" in certain contexts, as well as acidic and basic compounds.
Electrolytes readily dissolve and ionize in water. The term "electrolyte" refers to a molecule that will produce ions in solution, and can be synonymous with "salt" in certain contexts, as well as acidic and basic compounds.
Compare your answer with the correct one above
What property of water makes it a good solvent for ionic salts?
What property of water makes it a good solvent for ionic salts?
When dealing with solutions, it is helpful to remember that solubility depends on polarity and that "like dissolves like." Polar solutes (ionic salts) dissolve well in polar solvents (water); the same goes for nonpolar solutes and solvents.
When dealing with solutions, it is helpful to remember that solubility depends on polarity and that "like dissolves like." Polar solutes (ionic salts) dissolve well in polar solvents (water); the same goes for nonpolar solutes and solvents.
Compare your answer with the correct one above
Which of the following statements about water are incorrect?
Which of the following statements about water are incorrect?
Hydrophobic interactions are driven by the increase in entropy (not enthalpy) that water molecules achieve by excluding a nonpolar solute. In the hydrophobic effect, water initially forms cage-like structures called clathrates around the nonpolar solute, which is entropically unfavorable. However, entropy is regained when the water molecules exclude the solute and interact with each other in a disordered manner.
Hydrophobic interactions are driven by the increase in entropy (not enthalpy) that water molecules achieve by excluding a nonpolar solute. In the hydrophobic effect, water initially forms cage-like structures called clathrates around the nonpolar solute, which is entropically unfavorable. However, entropy is regained when the water molecules exclude the solute and interact with each other in a disordered manner.
Compare your answer with the correct one above
The primary reason that water is liquid at room temperature is because of .
The primary reason that water is liquid at room temperature is because of .
Cohesion is defined as attraction between the same type of molecule. Water attracts other water molecules because it is polar and has partial charges. This attraction means that water has strong intermolecular forces even at room temperature and more thermal energy is required to vaporize it. Adhesion involves the attraction of a substance with a container or surface.
Cohesion is defined as attraction between the same type of molecule. Water attracts other water molecules because it is polar and has partial charges. This attraction means that water has strong intermolecular forces even at room temperature and more thermal energy is required to vaporize it. Adhesion involves the attraction of a substance with a container or surface.
Compare your answer with the correct one above
Which of the following is false about water?
Which of the following is false about water?
The electrons around water are not symmetrically positioned; rather, they are distributed toward the oxygen atom, which is highly electronegative. Hence, water's two hydrogen atoms have a net positive charge. Nonetheless, the total charge on water is neutral, with electropositive and electronegative regions, rendering it polar. This polarity allows water molecules to hydrogen-bond with each other.
The electrons around water are not symmetrically positioned; rather, they are distributed toward the oxygen atom, which is highly electronegative. Hence, water's two hydrogen atoms have a net positive charge. Nonetheless, the total charge on water is neutral, with electropositive and electronegative regions, rendering it polar. This polarity allows water molecules to hydrogen-bond with each other.
Compare your answer with the correct one above
Which of the following polymers is not formed by condensation?
Which of the following polymers is not formed by condensation?
The important point here is that biological polymers are basically all condensation polymers. In the case of proteins, polysaccharides (carbohydrates), and nucleic acids (like DNA and RNA), synthesis occurs via a loss of a water molecule. Non-biological molecules can also be formed via condensation, such as nylon, which also often has water as its by-product. Polystyrene is an addition polymer; upon formation, monomers do not lose any molecules. Bonds are only rearranged. Although it may seem counterintuitive, the fact is that in nature, polymers do not typically form this way.
The important point here is that biological polymers are basically all condensation polymers. In the case of proteins, polysaccharides (carbohydrates), and nucleic acids (like DNA and RNA), synthesis occurs via a loss of a water molecule. Non-biological molecules can also be formed via condensation, such as nylon, which also often has water as its by-product. Polystyrene is an addition polymer; upon formation, monomers do not lose any molecules. Bonds are only rearranged. Although it may seem counterintuitive, the fact is that in nature, polymers do not typically form this way.
Compare your answer with the correct one above
Which accurately describes the effects of solute concentrations on cells?
Which accurately describes the effects of solute concentrations on cells?
Hypotonic solutions have a low solute concentration, and hypertonic solutions have high solute concentration. By the rules of osmosis, water moves in and out of cells along a concentration gradient, because membranes are only slightly permeable to water. Hence in a hypotonic solution, water will enter cells, causing them to swell and possibly break, while in a hypertonic solution, cells will lose water and shrink. Aquaporins are water channels that encourage osmosis, rather than hinder it.
Hypotonic solutions have a low solute concentration, and hypertonic solutions have high solute concentration. By the rules of osmosis, water moves in and out of cells along a concentration gradient, because membranes are only slightly permeable to water. Hence in a hypotonic solution, water will enter cells, causing them to swell and possibly break, while in a hypertonic solution, cells will lose water and shrink. Aquaporins are water channels that encourage osmosis, rather than hinder it.
Compare your answer with the correct one above
How many hydrogen bonds can a molecule of water participate in?
How many hydrogen bonds can a molecule of water participate in?
A molecule of water is polar with the two hydrogen atoms being partially posistive and the oxygen atom being partially negative. The two hydrogens can therefore each act as a donor which accounts for two net hyrdogen bonds made by water. The oxygen contains a partial negative charge and two lone electrons pairs can each act as acceptors and from two more hydrogen bonds, making a total of 4.
A molecule of water is polar with the two hydrogen atoms being partially posistive and the oxygen atom being partially negative. The two hydrogens can therefore each act as a donor which accounts for two net hyrdogen bonds made by water. The oxygen contains a partial negative charge and two lone electrons pairs can each act as acceptors and from two more hydrogen bonds, making a total of 4.
Compare your answer with the correct one above
A dialysis bag containing pure water is placed in a beaker containing a 1 molar glucose in water. The pore size of the dialysis bag is only large enough to allow water to pass through it. What will be the net flow of water?
A dialysis bag containing pure water is placed in a beaker containing a 1 molar glucose in water. The pore size of the dialysis bag is only large enough to allow water to pass through it. What will be the net flow of water?
Osmosis states that a solvent will move from a region of high concentration to a region of relatively lower concentration. In this case the solvent is water. The concentration of water inside the dialysis bag is higher than the concentration of water in the beaker because this water also contains 1 molar glucose. Therefore the water in the dialysis bag will flow out into the beaker to bring the concentration of water in both spaces toward equilibrium
Osmosis states that a solvent will move from a region of high concentration to a region of relatively lower concentration. In this case the solvent is water. The concentration of water inside the dialysis bag is higher than the concentration of water in the beaker because this water also contains 1 molar glucose. Therefore the water in the dialysis bag will flow out into the beaker to bring the concentration of water in both spaces toward equilibrium
Compare your answer with the correct one above
Why is water polar?
Why is water polar?
Water is polar for all of these reasons. First, oxygen is more electronegative than hydrogen. This means that oxygen attracts electrons more strongly than hydrogen does. Thus, in the hydrogen-oxygen bond of water, the electrons will be distributed asymmetrically--they will be oriented more towards oxygen than hydrogen. The molecular geometry of the water molecule (bent) results from oxygen containing a steric number of four with two lone pairs, thus the molecule has a slightly positive end and a slightly negative end.
Water is polar for all of these reasons. First, oxygen is more electronegative than hydrogen. This means that oxygen attracts electrons more strongly than hydrogen does. Thus, in the hydrogen-oxygen bond of water, the electrons will be distributed asymmetrically--they will be oriented more towards oxygen than hydrogen. The molecular geometry of the water molecule (bent) results from oxygen containing a steric number of four with two lone pairs, thus the molecule has a slightly positive end and a slightly negative end.
Compare your answer with the correct one above
What percentage of the human body is composed of interstitial water?
What percentage of the human body is composed of interstitial water?
Interstitial water is the fluid on the outside of cells, and surrounds the cells of the human body. While estimates vary, the best answer is that 15% of the entire human body is composed of interstitial water. Overall, about 60% of the body (42L) is composed of water. Additionally, about two-thirds of the total body water is intracellular water. Finally, about 5% of the entire body is composed of plasma.
Remember that these percentages are estimates, and vary by individual. Sex and muscle mass are two factors that can significantly alter these estimates.
Interstitial water is the fluid on the outside of cells, and surrounds the cells of the human body. While estimates vary, the best answer is that 15% of the entire human body is composed of interstitial water. Overall, about 60% of the body (42L) is composed of water. Additionally, about two-thirds of the total body water is intracellular water. Finally, about 5% of the entire body is composed of plasma.
Remember that these percentages are estimates, and vary by individual. Sex and muscle mass are two factors that can significantly alter these estimates.
Compare your answer with the correct one above