Ohm's Law - AP Physics 2
Card 0 of 96




What is the current flowing through
?
What is the current flowing through ?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



We will then find the total current of the circuit. This will also be the current of
because this resistor is not in parallel with any others.




,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
We will then find the total current of the circuit. This will also be the current of because this resistor is not in parallel with any others.
Compare your answer with the correct one above




What is the current through the battery in the above circuit?
What is the current through the battery in the above circuit?
First, find the total resistance of the circuit. Since the resistors are in parallel, use the following formula:

Plug in known values.


Next, use Ohm's law to find current.

Plug in known values.

First, find the total resistance of the circuit. Since the resistors are in parallel, use the following formula:
Plug in known values.
Next, use Ohm's law to find current.
Plug in known values.
Compare your answer with the correct one above
You have a circuit with a
resistor connected to a
battery. What is the current through the resistor?
You have a circuit with a resistor connected to a
battery. What is the current through the resistor?
To find the current in a circuit with a battery and resistor(s), you use Ohm's Law.

We have the voltage and we have the resistance, so we don't need to rearrange the equation.


Therefore, the current through the resistor is 2 amps (
).
To find the current in a circuit with a battery and resistor(s), you use Ohm's Law.
We have the voltage and we have the resistance, so we don't need to rearrange the equation.
Therefore, the current through the resistor is 2 amps ().
Compare your answer with the correct one above
There are 3 resistors in series. Their resistances are, in order,
,
, and
. The total potential drop is
. What is the potential drop across the second resistor?
There are 3 resistors in series. Their resistances are, in order, ,
, and
. The total potential drop is
. What is the potential drop across the second resistor?
Use Ohm's law to find the current passing through each resistor. Because they are in series, they have the same amount of current. Once we get the current, we can plug in the resistance for each resistor to find its potential drop.



Now, find the potential drop across the
resistor.



Therefore, the potential drop across the
resistor is 
Use Ohm's law to find the current passing through each resistor. Because they are in series, they have the same amount of current. Once we get the current, we can plug in the resistance for each resistor to find its potential drop.
Now, find the potential drop across the resistor.
Therefore, the potential drop across the resistor is
Compare your answer with the correct one above
A
battery produces a current of
in a piece of copper wire. What is the resistance of the copper wire?
A battery produces a current of
in a piece of copper wire. What is the resistance of the copper wire?
Even though there is no resistor, Ohm's law still applies. Use it to find the resistance of the wire.



The resistance of the copper wire is 
Even though there is no resistor, Ohm's law still applies. Use it to find the resistance of the wire.
The resistance of the copper wire is
Compare your answer with the correct one above




In the circuit above, find the voltage drop across
.
In the circuit above, find the voltage drop across .
First, find the total resistance of the circuit.
and
are in parallel, so we find the equivalent resistance by using the following formula:



Next, add the series resistors together.


Use Ohm's law to find the current through the system.




Since
and
are in parallel, they will have the same voltage drop accross them.



First, find the total resistance of the circuit.
and
are in parallel, so we find the equivalent resistance by using the following formula:
Next, add the series resistors together.
Use Ohm's law to find the current through the system.
Since and
are in parallel, they will have the same voltage drop accross them.
Compare your answer with the correct one above




In the circuit above, find the voltage drop across
.
In the circuit above, find the voltage drop across .
First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:




Next, add the series resistors together.


Use Ohm's law to find the current in the system.




and
will have the same voltage drop across them, as they are in parallel, and are equivalent to the combined resistor 



First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:
Next, add the series resistors together.
Use Ohm's law to find the current in the system.
and
will have the same voltage drop across them, as they are in parallel, and are equivalent to the combined resistor
Compare your answer with the correct one above




In the circuit above, find the voltage drop across
.
In the circuit above, find the voltage drop across .
First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:




Next, add the series resistors together.


Use Ohm's law to find the current in the system.




and
will have the same voltage drop across them, as they are in parallel, and are equivalent to the combined resistor 



First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:
Next, add the series resistors together.
Use Ohm's law to find the current in the system.
and
will have the same voltage drop across them, as they are in parallel, and are equivalent to the combined resistor
Compare your answer with the correct one above




In the circuit above, find the current through
.
In the circuit above, find the current through .
First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:




Next, add the series resistors together.


Use Ohm's law to find the current in the system.




The current through
and
needs to add up to the total current, since they are in parallel.


Also, the voltage drop across them need to be equal, since they are in parallel.



Set up a system of equations.


Solve.



First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:
Next, add the series resistors together.
Use Ohm's law to find the current in the system.
The current through and
needs to add up to the total current, since they are in parallel.
Also, the voltage drop across them need to be equal, since they are in parallel.
Set up a system of equations.
Solve.
Compare your answer with the correct one above




In the circuit above, find the current through
.
In the circuit above, find the current through .
First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:




Next, add the series resistors together.


Use Ohm's law to find the current in the system.




The current through
and
needs to add up to the total current, since they are in parallel.


Also, the voltage drop across them need to be equal, since they are in parallel.



Set up a system of equations.


Solve.



First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:
Next, add the series resistors together.
Use Ohm's law to find the current in the system.
The current through and
needs to add up to the total current, since they are in parallel.
Also, the voltage drop across them need to be equal, since they are in parallel.
Set up a system of equations.
Solve.
Compare your answer with the correct one above




In the circuit above, find the current through
.
In the circuit above, find the current through .
First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:




Next, add the series resistors together.


Use Ohm's law to find the current in the system.




In series, all resistors will have the same current.
Thus, the current through
is the same as through the rest of the circuit.
First, find the total resistance of the circuit.
and
are in parallel, so we find their equivalent resistance by using the following formula:
Next, add the series resistors together.
Use Ohm's law to find the current in the system.
In series, all resistors will have the same current.
Thus, the current through is the same as through the rest of the circuit.
Compare your answer with the correct one above




What is the total resistance of the circuit?
What is the total resistance of the circuit?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
Compare your answer with the correct one above




What is the current flowing through
?
What is the current flowing through ?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



First, we need to find the total current of the circuit, we simply use:




Because
,
and
are in parallel,

Also, the voltage drop must be the same across all three

Using


Using algebraic subsitution we get:

Solving for 



,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
First, we need to find the total current of the circuit, we simply use:
Because ,
and
are in parallel,
Also, the voltage drop must be the same across all three
Using
Using algebraic subsitution we get:
Solving for
Compare your answer with the correct one above




What is the current flowing through
?
What is the current flowing through ?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



First, we need to find the total current of the circuit, we simply use:




Because
,
and
are in parallel,

Also, the voltage drop must be the same across all three

Using


Using algebraic subsitution we get:

Solving for 



,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
First, we need to find the total current of the circuit, we simply use:
Because ,
and
are in parallel,
Also, the voltage drop must be the same across all three
Using
Using algebraic subsitution we get:
Solving for
Compare your answer with the correct one above




What is the current flowing through
?
What is the current flowing through ?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



First, we need to find the total current of the circuit, we simply use:




Because
,
and
are in parallel,

Also, the voltage drop must be the same across all three

Using


Using algebraic subsitution we get:

Solving for 



,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
First, we need to find the total current of the circuit, we simply use:
Because ,
and
are in parallel,
Also, the voltage drop must be the same across all three
Using
Using algebraic subsitution we get:
Solving for
Compare your answer with the correct one above




What is the voltage drop across
?
What is the voltage drop across ?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



We will then determine the total current of the circuit.




Once again, using

Where
is the resistance of the resistor in question, we get


,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
We will then determine the total current of the circuit.
Once again, using
Where is the resistance of the resistor in question, we get
Compare your answer with the correct one above




What is the voltage drop across
?
What is the voltage drop across ?
,
, and
are in parallel, so we add them by using:

We find that 
,
, and
are in series. So we use:



First, we need to find the total current of the circuit, we simply use:




Because
,
and
are in parallel,

Also, the voltage drop must be the same across all three

Using


Using algebraic subsitution we get:

Solving for 



Using



,
, and
are in parallel, so we add them by using:
We find that
,
, and
are in series. So we use:
First, we need to find the total current of the circuit, we simply use:
Because ,
and
are in parallel,
Also, the voltage drop must be the same across all three
Using
Using algebraic subsitution we get:
Solving for
Using
Compare your answer with the correct one above

The current through
is
,
has a resistance of
. Determine the voltage of the battery.
The current through is
,
has a resistance of
. Determine the voltage of the battery.
Due to the "loop rule", the voltage increase in the battery will need to be equal to the voltage drop in the resistor.

Use Ohm's law:

Combine equations:

Plug in values:


Due to the "loop rule", the voltage increase in the battery will need to be equal to the voltage drop in the resistor.
Use Ohm's law:
Combine equations:
Plug in values:
Compare your answer with the correct one above

If the battery has a voltage of
, and
has a resistance of
, determine the current through
.
If the battery has a voltage of , and
has a resistance of
, determine the current through
.
Due to the "loop rule", the voltage increase in the battery will need to be equal to the voltage drop in the resistor.

Use Ohm's law:

Combine equations:

Plug in values:


Due to the "loop rule", the voltage increase in the battery will need to be equal to the voltage drop in the resistor.
Use Ohm's law:
Combine equations:
Plug in values:
Compare your answer with the correct one above
A
battery is placed in series with five
resistors. Find the total resistance.
A battery is placed in series with five
resistors. Find the total resistance.
In series, resistance adds conventionally.

In series, resistance adds conventionally.
Compare your answer with the correct one above