Gases - AP Chemistry

Rate of effusion:

and must be used because they exist as bimolecular molecules. The correct answer is that Oxygen gas will effuse 4 times slower than hydrogen gas.

According to Graham's law, the rate of diffusion of a gas molecule is inversely proportional to the root square of that molecule's mass. Because molecule B has a smaller mass than molecule A, it will have a higher rate of diffusion.

Note: this also applies to finding the rate of effusion.

This question is notably difficult, as it may not be immediately apparent what concept is being tested. As the vapors of the compounds mix and react, we are able to establish the distance the each vapor has traveled from the cotton ball into the tube in the given amount of time. The tube is 20cm, and the reaction takes place 6cm from the mystery compound cotton ball. From this, we can establish that in an equal amount of time the HCl vapor traveled 14cm and the mystery compound traveled 6cm.

In order to solve this problem, we use Graham's law to compare molar masses to the rates of diffusion of the two gases.

Since HCl moved 14cm to the right before interacting with the mystery compound, we know that the mystery compound moved only 6cm to the left. As a result, the diffusion ratio is 2.33.

Now, we need to find the square root of the inversed molar masses, which equals this diffusion ratio.

So, the molar mass of the mystery compound is 198 grams per mole. This makes sense, because larger gases will move more slowly compared to lighter gases.

The rate of effusion for two gases can be compared to one another using the following equation:

Here, the effusion rates are inversely proportional to the square root of the molecular masses of the gases in question. Because the relationship is to the square roots of the molecular masses, we will not observe a 2:1 ratio of effusion for neon compared to argon.

We will, however, see that more neon effuses out of container A compared to the amount of argon because neon is the lighter gas and will thus have a faster effusion rate. As a result, there will be more argon than neon in container A after the pinhole is plugged. This results in argon having a larger partial pressure than neon in container A.

We can compare the effusion rates of these gases using the following equation.

By calling neon "gas 1" and argon "gas 2," we can compare the effusion rates of the two gases by plugging their molecular masses into the equation.

This proportion is equal to the rate of neon effusion over the rate of argon effusion, giving the ratio of neon atoms to argon atoms in container B.

As a result, 141 atoms of neon gas will effuse out of the pinhole for every 100 argon gas atoms. Keep in mind that the heavier gas will effuse at a slower rate than the lighter gas; thus, we would expect there to be more neon than argon in container B.

At a particular temperature, the average kinetic energy of all gaseous molecules is equal. Since hydrogen gas has the lowest mass out of these gases, it will have the highest average velocity. This means that it will exit out of the tiny hole at a rate faster than the other gases. Conversely, bromine, which has the most mass compared to the other gases, will exit the hole the slowest.

This relationship is mathematically represented in Graham's law:

As the mass increases, the rate of effusion decreases.

The rate of effusion for a gas is inversely proportional to the square-root of its molecular mass (Graham's Law).

The gas with the lowest molecular weight will effuse the fastest.

Oxygen:

Nitrogen:

Carbon dioxide:

Sulfur dioxide:

Helium:

The lightest, and therefore fastest, gas is helium.

The rate of effusion of a gas is inversely proportional to the square root of the molecular weight of the gas.

The lighter a gas is, the faster it will effuse; the heavier a gas is, the slower it will effuse.

Of all the choices, helium (He) has the lowest molecular weight (atomic weight in this case), so it will have the highest rate of effusion.

In order to answer this question, let's start by considering what effusion is and what things affect it. Effusion is the movement of a gas through a tiny hole that separates two different spaces. Because the gas particles move around in random directions with an average speed that is dependent on the temperature of the sample, lighter gas particle will move faster than heavier gas particles. This is because at a given temperature, all gas particles in a sample will have the same average kinetic energy. Consequently, we would expect gas particles with a higher molar mass to effuse more slowly than gases with a lower molar mass. This means that Gas B should effuse faster than Gas A.

The next step is to actually calculate how much greater Gas B effuses compared to Gas A. To do this, we'll need to use the following equation:

Since we know that Gas A is times heavier than Gas B, we can plug this into the equation to solve for the ratio of Gas B's rate of effusion to that of Gas A.

Therefore, Gas B effuses times faster than Gas A.

Rate of effusion:

and must be used because they exist as bimolecular molecules. The correct answer is that Oxygen gas will effuse 4 times slower than hydrogen gas.

According to Graham's law, the rate of diffusion of a gas molecule is inversely proportional to the root square of that molecule's mass. Because molecule B has a smaller mass than molecule A, it will have a higher rate of diffusion.

Note: this also applies to finding the rate of effusion.

This question is notably difficult, as it may not be immediately apparent what concept is being tested. As the vapors of the compounds mix and react, we are able to establish the distance the each vapor has traveled from the cotton ball into the tube in the given amount of time. The tube is 20cm, and the reaction takes place 6cm from the mystery compound cotton ball. From this, we can establish that in an equal amount of time the HCl vapor traveled 14cm and the mystery compound traveled 6cm.

In order to solve this problem, we use Graham's law to compare molar masses to the rates of diffusion of the two gases.

Since HCl moved 14cm to the right before interacting with the mystery compound, we know that the mystery compound moved only 6cm to the left. As a result, the diffusion ratio is 2.33.

Now, we need to find the square root of the inversed molar masses, which equals this diffusion ratio.

So, the molar mass of the mystery compound is 198 grams per mole. This makes sense, because larger gases will move more slowly compared to lighter gases.

The rate of effusion for two gases can be compared to one another using the following equation:

Here, the effusion rates are inversely proportional to the square root of the molecular masses of the gases in question. Because the relationship is to the square roots of the molecular masses, we will not observe a 2:1 ratio of effusion for neon compared to argon.

We will, however, see that more neon effuses out of container A compared to the amount of argon because neon is the lighter gas and will thus have a faster effusion rate. As a result, there will be more argon than neon in container A after the pinhole is plugged. This results in argon having a larger partial pressure than neon in container A.

We can compare the effusion rates of these gases using the following equation.

By calling neon "gas 1" and argon "gas 2," we can compare the effusion rates of the two gases by plugging their molecular masses into the equation.

This proportion is equal to the rate of neon effusion over the rate of argon effusion, giving the ratio of neon atoms to argon atoms in container B.

As a result, 141 atoms of neon gas will effuse out of the pinhole for every 100 argon gas atoms. Keep in mind that the heavier gas will effuse at a slower rate than the lighter gas; thus, we would expect there to be more neon than argon in container B.

At a particular temperature, the average kinetic energy of all gaseous molecules is equal. Since hydrogen gas has the lowest mass out of these gases, it will have the highest average velocity. This means that it will exit out of the tiny hole at a rate faster than the other gases. Conversely, bromine, which has the most mass compared to the other gases, will exit the hole the slowest.

This relationship is mathematically represented in Graham's law:

As the mass increases, the rate of effusion decreases.

The rate of effusion for a gas is inversely proportional to the square-root of its molecular mass (Graham's Law).

The gas with the lowest molecular weight will effuse the fastest.

Oxygen:

Nitrogen:

Carbon dioxide:

Sulfur dioxide:

Helium:

The lightest, and therefore fastest, gas is helium.

The rate of effusion of a gas is inversely proportional to the square root of the molecular weight of the gas.

The lighter a gas is, the faster it will effuse; the heavier a gas is, the slower it will effuse.

Of all the choices, helium (He) has the lowest molecular weight (atomic weight in this case), so it will have the highest rate of effusion.

In order to answer this question, let's start by considering what effusion is and what things affect it. Effusion is the movement of a gas through a tiny hole that separates two different spaces. Because the gas particles move around in random directions with an average speed that is dependent on the temperature of the sample, lighter gas particle will move faster than heavier gas particles. This is because at a given temperature, all gas particles in a sample will have the same average kinetic energy. Consequently, we would expect gas particles with a higher molar mass to effuse more slowly than gases with a lower molar mass. This means that Gas B should effuse faster than Gas A.

The next step is to actually calculate how much greater Gas B effuses compared to Gas A. To do this, we'll need to use the following equation:

Since we know that Gas A is times heavier than Gas B, we can plug this into the equation to solve for the ratio of Gas B's rate of effusion to that of Gas A.

Therefore, Gas B effuses times faster than Gas A.

Rate of effusion:

and must be used because they exist as bimolecular molecules. The correct answer is that Oxygen gas will effuse 4 times slower than hydrogen gas.

According to Graham's law, the rate of diffusion of a gas molecule is inversely proportional to the root square of that molecule's mass. Because molecule B has a smaller mass than molecule A, it will have a higher rate of diffusion.

Note: this also applies to finding the rate of effusion.