How to find conflicting viewpoints in physics - ACT Science
Card 0 of 880
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
The amount of force exerted on an object can be calculated by multiplying the mass of the object by the acceleration it experiences. Given that Student 3's explanation is correct, which of the following situations would allow a bird's body to experience the greatest upward force?
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
The amount of force exerted on an object can be calculated by multiplying the mass of the object by the acceleration it experiences. Given that Student 3's explanation is correct, which of the following situations would allow a bird's body to experience the greatest upward force?
According to Student 3, when a bird's wings push air backward and downward, the bird experiences an opposing force that carries it upward and forward. So, when a bird's wings exert a greater downward force on air, the bird will experience a greater force pulling it upward.
Since force is calculated by multiplying the mass of the air displaced by the acceleration that the air experiences, the greatest force is exerted when 
of air is displaced at an acceleration of 
.
According to Student 3, when a bird's wings push air backward and downward, the bird experiences an opposing force that carries it upward and forward. So, when a bird's wings exert a greater downward force on air, the bird will experience a greater force pulling it upward.
Since force is calculated by multiplying the mass of the air displaced by the acceleration that the air experiences, the greatest force is exerted when
Compare your answer with the correct one above
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Dragonflies have four membranous, flat, independently-moving wings. Which of the three students' explanations of bird flight cannot be used to explain how dragonflies fly?
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Dragonflies have four membranous, flat, independently-moving wings. Which of the three students' explanations of bird flight cannot be used to explain how dragonflies fly?
Student 1's explanation focuses on the difference in air pressure that is generated when air flows over and under a wing with the shape of an airfoil; however, since dragonflies have flat wings, Student 1's explanation would not explain how dragonfly wings allow dragonflies to fly.
Student 2 and Student 3's explanations, however, do not rely on a wing having a particular shape. Instead, Student 2 and Student 3 focus on the way that the angle of a wing directs air, or on the force exerted on air when wings flap. So, it is possible to use Student 2 and Student 3's explanations to explain dragonfly flight.
Student 1's explanation focuses on the difference in air pressure that is generated when air flows over and under a wing with the shape of an airfoil; however, since dragonflies have flat wings, Student 1's explanation would not explain how dragonfly wings allow dragonflies to fly.
Student 2 and Student 3's explanations, however, do not rely on a wing having a particular shape. Instead, Student 2 and Student 3 focus on the way that the angle of a wing directs air, or on the force exerted on air when wings flap. So, it is possible to use Student 2 and Student 3's explanations to explain dragonfly flight.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following describes a difference between the explanations of Scientist 1 and Scientist 2?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following describes a difference between the explanations of Scientist 1 and Scientist 2?
In his explanation, Scientist 1 describes electricity as a moving electric charge caused by the flow of electrons. In contrast, Scientist 2 distinguishes between two forms of electricity: current electricity and static electricity. According to Scientist 2, current electricity is a moving electric charge, while static electricity occurs when objects accumulate net excesses of positive or negative charge.
In his explanation, Scientist 1 describes electricity as a moving electric charge caused by the flow of electrons. In contrast, Scientist 2 distinguishes between two forms of electricity: current electricity and static electricity. According to Scientist 2, current electricity is a moving electric charge, while static electricity occurs when objects accumulate net excesses of positive or negative charge.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
An iron magnet is hit repeatedly with a hammer. Afterwards, when the iron magnet is examined, it is found to be much less magnetic than it was before. What explanation would Scientist 1 most likely provide for this?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
An iron magnet is hit repeatedly with a hammer. Afterwards, when the iron magnet is examined, it is found to be much less magnetic than it was before. What explanation would Scientist 1 most likely provide for this?
Scientist 1 states that magnetism is caused by the alignment of magnetic domains in a material. So, according to Scientist 1's explanation, the domains of the iron magnet were aligned before it was hit with the hammer.
Scientist 1 also says that in non-magnets, the magnetic domains are oriented randomly. So, we can assume that hitting the iron magnet with the hammer caused the magnetic domains to be knocked out of alignment and become oriented more randomly. This made the magnet less magnetic.
Scientist 1 states that magnetism is caused by the alignment of magnetic domains in a material. So, according to Scientist 1's explanation, the domains of the iron magnet were aligned before it was hit with the hammer.
Scientist 1 also says that in non-magnets, the magnetic domains are oriented randomly. So, we can assume that hitting the iron magnet with the hammer caused the magnetic domains to be knocked out of alignment and become oriented more randomly. This made the magnet less magnetic.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Electric current is measured in amperes (A). According to Scientist 1 and the information in the passage, in which of the following situations would one measure the greatest amplitude for an electric field?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Electric current is measured in amperes (A). According to Scientist 1 and the information in the passage, in which of the following situations would one measure the greatest amplitude for an electric field?
The introductory information states that an electric field is produced by an electric charge, and that the strength of the electric field is inversely proportional to the square of the distance from the charge. (This means, for example, that the electric field 10 cm away from a charge is 100 times weaker than the field 1 cm away from the charge.) Scientist 1 gives us additional information—he tells us that a moving electric charge can be measured as current.
So, the electric field will have its greatest magnitude when it is measured close (1 cm) to a wire carrying a charge, and when the flow of charge–the current–in the wire is greater (10 A).
The introductory information states that an electric field is produced by an electric charge, and that the strength of the electric field is inversely proportional to the square of the distance from the charge. (This means, for example, that the electric field 10 cm away from a charge is 100 times weaker than the field 1 cm away from the charge.) Scientist 1 gives us additional information—he tells us that a moving electric charge can be measured as current.
So, the electric field will have its greatest magnitude when it is measured close (1 cm) to a wire carrying a charge, and when the flow of charge–the current–in the wire is greater (10 A).
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following questions is not answered in Scientist 3's explanation, but is answered by Scientist 2?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following questions is not answered in Scientist 3's explanation, but is answered by Scientist 2?
In the first paragraph of Scientist 2's explanation, current electricity is described as the moving form of electricity, while static electricity is described as a form of electricity that occurs when objects have an excess of positive or negative charge. Scientist 3's explanation, however, only mentions current electricity—not static electricity—and does not describe the difference between the two.
In the first paragraph of Scientist 2's explanation, current electricity is described as the moving form of electricity, while static electricity is described as a form of electricity that occurs when objects have an excess of positive or negative charge. Scientist 3's explanation, however, only mentions current electricity—not static electricity—and does not describe the difference between the two.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 3's hypothesis?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 3's hypothesis?
Scientist 3 argues that an electric current can induce a magnetic field. So, if we have a wire in which an electric current is flowing, we should also expect there to be a magnetic field around the wire. The magnetic field should exert a force—either an attraction or repulsion—on a magnet that is placed in it. If no attraction or repulsion on the magnet is observed, this would suggest that there is not a magnetic field around the wire—contrary to what Scientist 3 says.
Scientist 3 argues that an electric current can induce a magnetic field. So, if we have a wire in which an electric current is flowing, we should also expect there to be a magnetic field around the wire. The magnetic field should exert a force—either an attraction or repulsion—on a magnet that is placed in it. If no attraction or repulsion on the magnet is observed, this would suggest that there is not a magnetic field around the wire—contrary to what Scientist 3 says.
Compare your answer with the correct one above
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Suppose that Student 1 argues that his explanation of bird flight also applies to flight in general. Which of the following, if found, provides the strongest evidence against the explanation given by Student 1?
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Suppose that Student 1 argues that his explanation of bird flight also applies to flight in general. Which of the following, if found, provides the strongest evidence against the explanation given by Student 1?
Student 1 gives an explanation of flight in terms of the airfoil shapes of wings, which, he says, generate the upward force that allows a bird to stay aloft. If his explanation applies to flight in general, we can expect all objects that fly to have wings with airfoil shapes; however, if some airplanes do not have wings with airfoil shapes but are still able to fly, this would directly contradict Student 1's idea.
The fact that some airfoils have upper and lower sides that are both convex is not the best answer, because Student 1's explanation would still work if these kinds of airfoils create a difference in the air pressure above and below them.
Student 1 gives an explanation of flight in terms of the airfoil shapes of wings, which, he says, generate the upward force that allows a bird to stay aloft. If his explanation applies to flight in general, we can expect all objects that fly to have wings with airfoil shapes; however, if some airplanes do not have wings with airfoil shapes but are still able to fly, this would directly contradict Student 1's idea.
The fact that some airfoils have upper and lower sides that are both convex is not the best answer, because Student 1's explanation would still work if these kinds of airfoils create a difference in the air pressure above and below them.
Compare your answer with the correct one above
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Suppose that a robot is designed with a pair of wings that, on their downstroke, displace air downward and backward with a force of 10 N, and that, on their upstroke, displace air upward and forward with a force of 5 N.
Given that Student 3's explanation is correct, is it possible for such a robot to fly?
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Suppose that a robot is designed with a pair of wings that, on their downstroke, displace air downward and backward with a force of 10 N, and that, on their upstroke, displace air upward and forward with a force of 5 N.
Given that Student 3's explanation is correct, is it possible for such a robot to fly?
Student 3 states that birds are able to fly because their wings exert relatively more downward and backward force on air than they do forward and upward. According to Student 3, when a bird's wings push air backward and downward, the bird experiences an opposing force that carries it upward and forward.
In the situation described in this problem, the robot does exert a net downward and backward force on the air. So, it is possible for the robot to fly, because it will experience a force that carries it upward and forward.
Student 3 states that birds are able to fly because their wings exert relatively more downward and backward force on air than they do forward and upward. According to Student 3, when a bird's wings push air backward and downward, the bird experiences an opposing force that carries it upward and forward.
In the situation described in this problem, the robot does exert a net downward and backward force on the air. So, it is possible for the robot to fly, because it will experience a force that carries it upward and forward.
Compare your answer with the correct one above
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Which of the following, if found, provides the strongest evidence against the explanation of flight given by Student 3?
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
Which of the following, if found, provides the strongest evidence against the explanation of flight given by Student 3?
Student 3's explanation of flight focuses on relative amounts of force that a bird exerts on the air during the downstroke and upstroke of its wings. His explanation requires that a bird move its wings; however, if some birds are able to fly without moving their wings, this would suggest that bird flight cannot be explained wholly by the relative amounts of force that wings exert on air when they move up and down.
Student 3's explanation of flight focuses on relative amounts of force that a bird exerts on the air during the downstroke and upstroke of its wings. His explanation requires that a bird move its wings; however, if some birds are able to fly without moving their wings, this would suggest that bird flight cannot be explained wholly by the relative amounts of force that wings exert on air when they move up and down.
Compare your answer with the correct one above
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
The explanation given by Student 3 differs from the explanation given by Student 2 in that __________.
As part of an engineering competition, a group of students are asked to design a flying robot that simulates the way real birds fly. Below, three of the students give their explanations for how bird flight occurs.
Student 1:
Birds are able to fly due to the shape of their wings. Bird wings are convex on their upper sides, while their lower sides are usually concave. This type of shape is called an airfoil. When a wing travels through the air, air passing over the top of the wing must travel a greater distance than air passing under the wing. The stream of air passing over the wing and the stream of air passing under the wing meet together at the tail end of the wing. In order for both streams of air to meet at the same point behind the wing, the air above the wing, which travels a greater distance, must travel faster than the air below the wing.
When a volume of air travels more quickly over a distance, its molecules are spread out over a greater distance. As a result, the air traveling over the top of a wing has a lower pressure than the air traveling under the wing. Because the wing has a region of low pressure above it and a region of relative high pressure below it, it experiences a net upward force. When this upward force is greater than or equal to the bird's weight, or the force exerted on a bird by gravity, the bird is able to fly.
The magnitude of the upward force depends on the speed at which air flows across the wing and on the corresponding difference in pressure over and under the wing. When birds flap their wings, they increase the speed of air flowing across their wings, thus producing a greater upward force.
Student 2:
There are two components to bird flight: lift and thrust. "Lift" refers to the upward force that allows a bird to stay aloft in the air despite its weight, while "thrust" refers to the horizontal force that allows a bird to move forward through the air. Birds are able to fly because they do not hold their wings perfectly horizontally. Instead, their wings are angled slightly upward. The angle at which a wing is inclined upward, with respect to the horizontal, is called its "angle of attack."
Air is not an ideal gas; instead, it has viscosity. This means that the air flowing close to a solid object tends to follow the curves of that object. When air encounters a bird's wing, it follows the incline of the wing. Because of the wing's angle of attack, the air is directed downward and back. The air continues to move downward, even after it has left the wing. This movement of the air creates an opposing force that pushes the bird upward and forward.
Thus, the angle of attack of a bird's wings accounts for both the lift and thrust components of a bird's flight.
Student 3:
Birds are able to fly because the way in which they move their wings allows them to create a net movement of air downward and backward. The flapping of a bird's wings can be understood as being composed of two parts: a downstroke, during which the bird moves its wings down, and an upstroke, during which the bird moves its wings up. During a downstroke, a bird displaces a quantity of air downward and behind it. During an upstroke, however, the bird's wings are angled upward in a way that displaces less air, and its wing feathers rotate to allow air to pass through them. Thus, on the upstroke, the bird much exerts less force on the air than it does on the downstroke.
The explanation given by Student 3 differs from the explanation given by Student 2 in that __________.
Both Student 2 and Student 3 explain flight in terms of equal and opposite forces that are generated when wings move air downward and backward; however, Student 2 states that air moves downward and backward because it follows the shape and angle of a wing, while Student 3 states that air moves downward and backward because it is pushed down by a wing during the wing's downstroke.
Both Student 2 and Student 3 explain flight in terms of equal and opposite forces that are generated when wings move air downward and backward; however, Student 2 states that air moves downward and backward because it follows the shape and angle of a wing, while Student 3 states that air moves downward and backward because it is pushed down by a wing during the wing's downstroke.
Compare your answer with the correct one above
The graph below depicts the position of three different cars over a 15-second time interval.
Two students have conflicting views on determining which, if any, cars are accelerating. Which is the best method of determining which car is accelerating?
The graph below depicts the position of three different cars over a 15-second time interval.
Two students have conflicting views on determining which, if any, cars are accelerating. Which is the best method of determining which car is accelerating?
A position vs. velocity graph would help show if any cars have increasing or decreasing velocities, which, by definition, is acceleration or deacceleration, respectively. A car traveling at a constant speed is not accelerating. Where cars cross position zero is not relevant for the question stem. Any car with a slope not equal to zero tells us that the car is moving or has a speed, it does not, however, tell us whether the car is accelerating or not. Visually, an accelerating car would have a position that changes in the same direction by greater and greater amounts over the same timer interval, as in the case of car 3 over time 4s to 9s.
A position vs. velocity graph would help show if any cars have increasing or decreasing velocities, which, by definition, is acceleration or deacceleration, respectively. A car traveling at a constant speed is not accelerating. Where cars cross position zero is not relevant for the question stem. Any car with a slope not equal to zero tells us that the car is moving or has a speed, it does not, however, tell us whether the car is accelerating or not. Visually, an accelerating car would have a position that changes in the same direction by greater and greater amounts over the same timer interval, as in the case of car 3 over time 4s to 9s.
Compare your answer with the correct one above
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
Suppose a second group of students hypothesizes that the velocity of sound is inversely dependent upon the density of the substance through which the sound travels. Which study would best support their hypothesis and why?
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
Suppose a second group of students hypothesizes that the velocity of sound is inversely dependent upon the density of the substance through which the sound travels. Which study would best support their hypothesis and why?
In order for velocity to be inversely dependent upon density, one must increase as the other decreases. This is most consistent with the results of Study 2.
In order for velocity to be inversely dependent upon density, one must increase as the other decreases. This is most consistent with the results of Study 2.
Compare your answer with the correct one above
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
If the students' hypotheses were correct, what might be a worthwhile question for them to study next?
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
If the students' hypotheses were correct, what might be a worthwhile question for them to study next?
If the velocity of sound through a substance is directly dependent upon the density of the substance, then that would mean increasing density should always result in increasing velocity. Because this is not the case (see "lead" in Table 1 and the increasing velocities as density decreases in Table 2), there must be another factor or multiple factors affecting the velocity of sound as it travels through a substance.
The students' correct hypotheses would account for the remaining answer choices, so these would require no further investigation.
If the velocity of sound through a substance is directly dependent upon the density of the substance, then that would mean increasing density should always result in increasing velocity. Because this is not the case (see "lead" in Table 1 and the increasing velocities as density decreases in Table 2), there must be another factor or multiple factors affecting the velocity of sound as it travels through a substance.
The students' correct hypotheses would account for the remaining answer choices, so these would require no further investigation.
Compare your answer with the correct one above
A physicist wishes to study the trajectory of a ball launched horizontally. She varies parameters such as the launching velocity, starting height, and mass of the ball. For each trajectory, she records the time of flight (in seconds) and horizontal displacement (in meters). She assumes air resistance is negligible.
Figure 1
Using all of the data she collects, she constructs the following table:
Table 1
A physics student conducted a similar experiment and concluded that the time of flight for a horizontally launched ball was inversely related to the starting height. Is his conclusion consistent with the results of Trial 2?
A physicist wishes to study the trajectory of a ball launched horizontally. She varies parameters such as the launching velocity, starting height, and mass of the ball. For each trajectory, she records the time of flight (in seconds) and horizontal displacement (in meters). She assumes air resistance is negligible.
Figure 1
Using all of the data she collects, she constructs the following table:
Table 1
A physics student conducted a similar experiment and concluded that the time of flight for a horizontally launched ball was inversely related to the starting height. Is his conclusion consistent with the results of Trial 2?
Trial 2 shows that time of flight increases with increasing starting height. Therefore, the two are not inversely related and the student's conclusion was incorrect.
Trial 2 shows that time of flight increases with increasing starting height. Therefore, the two are not inversely related and the student's conclusion was incorrect.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In an experiment, an iron bar that showed no magnetism was heated and allowed to cool while aligned North-South with the Earth's magnetic field. After it cooled, the iron bar was found to be magnetic. Scientist 1 would most likely explain this result by saying which of the following?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In an experiment, an iron bar that showed no magnetism was heated and allowed to cool while aligned North-South with the Earth's magnetic field. After it cooled, the iron bar was found to be magnetic. Scientist 1 would most likely explain this result by saying which of the following?
Scientist 1 states that magnetism occurs when the magnetic domains in a material align. Since the iron bar initially showed no magnetism, we can assume that its magnetic domains were initially oriented randomly, and that it had no magnetic poles. Since the iron bar became magnetic after it was heated and cooled, the heating and cooling process likely reoriented the magnetic domains in the iron so that they became more aligned, creating two magnetic poles.
Scientist 1 states that magnetism occurs when the magnetic domains in a material align. Since the iron bar initially showed no magnetism, we can assume that its magnetic domains were initially oriented randomly, and that it had no magnetic poles. Since the iron bar became magnetic after it was heated and cooled, the heating and cooling process likely reoriented the magnetic domains in the iron so that they became more aligned, creating two magnetic poles.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
When two wires carrying electric currents are placed near each other, it is found that each of the wires exerts a slight attraction on the other. Scientist 3 would most likely explain this by saying which of the following?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
When two wires carrying electric currents are placed near each other, it is found that each of the wires exerts a slight attraction on the other. Scientist 3 would most likely explain this by saying which of the following?
In the first paragraph of her explanation, Scientist 3 states that an electric current can induce a magnetic field around it. So, when there are two wires carrying electric currents, she will assume that both of the wires produce a magnetic field. Since the two wires are attracted to each other, the magnetic fields likely also attract each other. Finally, Scientist 3 also states that the magnetic field produced by an electric current exists perpendicular to the current's direction of flow. So, the magnetic fields are oriented perpendicular to the wires that produce them.
In the first paragraph of her explanation, Scientist 3 states that an electric current can induce a magnetic field around it. So, when there are two wires carrying electric currents, she will assume that both of the wires produce a magnetic field. Since the two wires are attracted to each other, the magnetic fields likely also attract each other. Finally, Scientist 3 also states that the magnetic field produced by an electric current exists perpendicular to the current's direction of flow. So, the magnetic fields are oriented perpendicular to the wires that produce them.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In a compass, a needle spins to align North-South, following the Earth's magnetic field. Suppose that a compass is placed near wire through which an electric current flows, and it is observed that the needle of the compass no longer aligns to North-South. How would this affect the arguments of Scientist 2 and Scientist 3?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In a compass, a needle spins to align North-South, following the Earth's magnetic field. Suppose that a compass is placed near wire through which an electric current flows, and it is observed that the needle of the compass no longer aligns to North-South. How would this affect the arguments of Scientist 2 and Scientist 3?
Here, since the (magnetic) compass no longer aligns to North-South when it is near the wire, this implies that there is some kind of magnetic field near the wire which is interfering with the compass. This supports what Scientist 3 says in the first paragraph of her explanation: that an electric current can induce a magnetic field around it.
Scientist 2, however, makes no mention of this kind of electromagnetic induction in his explanation; however, he also does not say that it is not possible. His explanation is mostly about how magnetic poles are similar to and different from static electric charges. So, his argument is not affected by the observation that an electric current induces a magnetic field.
Here, since the (magnetic) compass no longer aligns to North-South when it is near the wire, this implies that there is some kind of magnetic field near the wire which is interfering with the compass. This supports what Scientist 3 says in the first paragraph of her explanation: that an electric current can induce a magnetic field around it.
Scientist 2, however, makes no mention of this kind of electromagnetic induction in his explanation; however, he also does not say that it is not possible. His explanation is mostly about how magnetic poles are similar to and different from static electric charges. So, his argument is not affected by the observation that an electric current induces a magnetic field.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 1's hypothesis?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 1's hypothesis?
Scientist 1 states that electricity and magnetism are completely separate phenomena; however, if a wire carrying an electric current exerts an attractive force on one pole of a magnet and a repulsive force on the other pole of the magnet, there must be an interaction between the electricity flowing through the wire and the magnet. Specifically, it seems like the electricity flowing through the wire is creating its own magnetic field, which attracts one pole of the magnet and repels the other pole.
Scientist 1 states that electricity and magnetism are completely separate phenomena; however, if a wire carrying an electric current exerts an attractive force on one pole of a magnet and a repulsive force on the other pole of the magnet, there must be an interaction between the electricity flowing through the wire and the magnet. Specifically, it seems like the electricity flowing through the wire is creating its own magnetic field, which attracts one pole of the magnet and repels the other pole.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
According to Scientist 2, which of the following would be an example of a static electric charge?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
According to Scientist 2, which of the following would be an example of a static electric charge?
Scientist 2 states that static electric charges occur when an object has a net excess of positive or negative charge. According to Scientist 2, static electric charges also don't involve a moving charge. So, one example of a static electric charge is a balloon that has picked up excess electrons: it has an excess of negative charge, but the charge is not moving.
Scientist 2 states that static electric charges occur when an object has a net excess of positive or negative charge. According to Scientist 2, static electric charges also don't involve a moving charge. So, one example of a static electric charge is a balloon that has picked up excess electrons: it has an excess of negative charge, but the charge is not moving.
Compare your answer with the correct one above